VN5E160S-E
| Parameters | |
|---|---|
| Lifecycle Status | NRND (Last Updated: 8 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Series | VIPower™ |
| JESD-609 Code | e4 |
| Feature | Auto Restart |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 160mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Peripheral Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 13V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | VN5E160 |
| Pin Count | 8 |
| Output Type | N-Channel |
| Max Output Current | 10A |
| Operating Supply Voltage | 13V |
| Interface | On/Off |
| Nominal Supply Current | 3.5mA |
| Output Configuration | High Side |
| Output Current | 10A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 3.5mA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 10 μs |
| Switch Type | General Purpose |
| Output Current per Channel | 7A |
| Nominal Input Voltage | 13V |
| Turn-Off Delay Time | 15 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 4.5V~28V |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Number of Drivers | 1 |
| Rds On (Typ) | 160m Ω (Max) |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
VN5E160S-E Overview
Tube is how it's packaged.The 8-SOIC (0.154, 3.90mm Width) package contains it.Mounting type Surface Mount is selected for the LED driving board.This switch is of type General Purpose.In order to guarantee reliable performance, the temperature should be set to -40°C~150°C TJ.A voltage of Not Required is used to power it.The maximum output voltage is N-Channel volts.In terms of features, the LED driving board has Auto Restart.It is part of the VN5E160 family of LED drivers.It consists of 8 terminations in total.During operation, the 8 pins are used.The LED driver has 1 functions.The maximum output current must drop to 10A to meet the operation criteria.As long as the supply voltage is 13V, high efficiency can be achieved.In this case, it is mounted in the way of Surface Mount.As a result, it has a total of 8 pins.Lighting drivers with 160mOhm resistance are used.It belongs to the VIPower? series.When this is the case, the output current is set to 10A.The LED driver is self-contained in an econtainer with Peripheral Drivers capacity.It is recommended to set the supply voltage to 13V for optimum efficiency.There is a maximum current requirement of 3.5mA for its operation.1 drivers are available for the part.
VN5E160S-E Features
Supplied from 13V
Resistance of 160mOhm
VN5E160S-E Applications
There are a lot of STMicroelectronics VN5E160S-E Power Switches ICs applications.
- Hot Swap
- Portable Video Game Players
- USB Ports/Hubs
- Wireless Modem Data Cards
- Hot Swap
- Portable GPS
- PC Cards
- Various applications equipped with buttons
- Hot-Swap Systems
- USB3.1 Power Delivery
