VN5E160STR-E
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | VIPower™ |
| Feature | Auto Restart |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 160mOhm |
| Subcategory | Peripheral Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 13V |
| Base Part Number | VN5E160 |
| Pin Count | 8 |
| Output Type | N-Channel |
| Max Output Current | 10A |
| Operating Supply Voltage | 13V |
| Interface | On/Off |
| Nominal Supply Current | 3.5mA |
| Output Configuration | High Side |
| Output Current | 10A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 3.5mA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 10 μs |
| Switch Type | General Purpose |
| Output Current per Channel | 7A |
| Nominal Input Voltage | 13V |
| Turn-Off Delay Time | 15 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 4.5V~28V |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Number of Drivers | 1 |
| Rds On (Typ) | 160m Ω (Max) |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
VN5E160STR-E Overview
Tape & Reel (TR) is how it's packaged.This package is included in 8-SOIC (0.154, 3.90mm Width).This LED driving board is mounted using the mounting type Surface Mount.The switch type is General Purpose.It is best to set the temperature to -40°C~150°C TJ to ensure reliable operation.With a supply voltage of Not Required, the LED driving board operates.The maximum output voltage of this LED driver is N-Channel volts.In terms of features, the LED driving board has Auto Restart.It is a member of the VN5E160 family.It has a total of 8 terminations.For operation, 8 pins are used.It contains 1 functions.The maximum output current must drop to 10A to meet the operation criteria.Supply voltages of 13V allow for high efficiency.The LED driving board is mounted in the way of Surface Mount.8 pins are equipped with it.Currently, the LED driving board has a resistance of 160mOhm ohms.Electrical components such as this are included in the VIPower? series.When this is the case, the output current is set to 10A.Self-contained LED driver with Peripheral Drivers capacity in an econtainer.For maximum efficiency, the supply voltage should be set to 13V.It has a maximum current requirement of 3.5mA.There are 1 drivers available for this part.
VN5E160STR-E Features
Supplied from 13V
Resistance of 160mOhm
VN5E160STR-E Applications
There are a lot of STMicroelectronics VN5E160STR-E Power Switches ICs applications.
- HDD, SSD
- Handheld Devices
- PC Cards
- Wearable Devices
- USB Protection
- Storage Drives
- HDD and SSD
- Telecom and Network Systems
- Notebook and Tablet Computers
- Solid-State Drives
