VN5T006ASPTR-E
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-PowerSOIC (0.370, 9.40mm Width) |
| Number of Pins | 10 |
| Manufacturer Package Identifier | PowerSO-10-GAPGCFT00197 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | VIPower™ |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 250 |
| Number of Functions | 1 |
| Supply Voltage | 24V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | VN5T006 |
| Pin Count | 10 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Supply Voltage-Max (Vsup) | 36V |
| Supply Voltage-Min (Vsup) | 8V |
| Interface | On/Off |
| Nominal Supply Current | 3mA |
| Output Configuration | High Side |
| Output Current | 115A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 32 μs |
| Switch Type | General Purpose |
| Turn-Off Delay Time | 67 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 8V~36V |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Output Peak Current Limit-Nom | 115A |
| Rds On (Typ) | 6m Ω |
| Max Junction Temperature (Tj) | 150°C |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| On-State Resistance | 6mOhm |
| Height | 3.75mm |
| Length | 9.4mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
VN5T006ASPTR-E Overview
As you can see, it's packaged in the way of a Tape & Reel (TR).It is included with the 10-PowerSOIC (0.370, 9.40mm Width) package as well.The lighting driver has the mounting type Surface Mount.It owns the General Purpose switch type.The temperature should be set to -40°C~150°C TJ to ensure reliable functioning.The LED driver has 1 outputs.Operation is based on a supply voltage of Not Required.A maximum voltage of N-Channel volts is available from the output of this LED driver.This object belongs to the VN5T006 family.It has a total of 10 terminations.The 10 pins are used for the operation of the system.It has 1 functions.High efficiency is possible when the supply voltage is set to 24V.The lighting driver is mounted in the way of Surface Mount.In total, it has 10 pins.The VIPower? series includes this electrical component.When this is the case, the output current is set to 115A.The LED driver is configured with a maximum supply voltage of 36V (Vsup).The supply voltage (Vsup) should be kept above 8V for normal operation.
VN5T006ASPTR-E Features
Supplied from 24V
VN5T006ASPTR-E Applications
There are a lot of STMicroelectronics VN5T006ASPTR-E Power Switches ICs applications.
- Solid-State Drives
- Low Voltage I/O System Power
- Wireless/Networking Cards
- Portable/Handheld Devices
- Portable Devices
- Portable Video Game Players
- Storage Drives
- Wireless Modem Data Cards
- PDAs
- Hot-Swap Systems
