VN610SP
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | PowerSO-10 Exposed Bottom Pad |
| Number of Pins | 10 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Series | VIPower™ |
| JESD-609 Code | e3 |
| Feature | Auto Restart |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Resistance | 10mOhm |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 139W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 13V |
| Base Part Number | VN610 |
| Pin Count | 10 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 45A |
| Operating Supply Voltage | 36V |
| Interface | On/Off |
| Nominal Supply Current | 10μA |
| Output Configuration | High Side |
| Power Dissipation | 139W |
| Output Current | 45A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 10μA |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 5.5V |
| Max Input Voltage | 36V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5.5V~36V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Rds On (Typ) | 10m Ω (Max) |
| Drain to Source Resistance | 35mOhm |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Height Seated (Max) | 3.75mm |
| Length | 9.4mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
VN610SP Overview
The LED driver's packaged as a Tube.Package PowerSO-10 Exposed Bottom Pad contains it.A Surface Mount mounting is used for the LED driving board.The switch type is General Purpose.To ensure reliable operation, the temperature should be set to -40°C~150°C TJ.The LED driver has a total of 1 outputs.It uses a supply voltage of Not Required to operate.A maximum output voltage of N-Channel volts can be achieved by this LED driver.Features of the lighting driver are Auto Restart.I believe it belongs to the VN610 family.The termination count is 10.In order to operate, the 10 pins are used.It contains 1 functions.It is necessary to reduce the maximum output current to 45A to meet the operation criteria.It is possible to obtain high efficiency with a supply voltage of 13V.Surface Mount is mounted in the way of this lighting driver.It is equipped with a total of 10 pins.In this LED driving board, there is 10mOhm resistance.There is an electrical component included in the VIPower? series.In this case, the output current is set to 45A.Self-contained LED driver with Peripheral Drivers capacity in an econtainer.It is recommended that the supply voltage be set at 36V in order to achieve maximum efficiency.Its maximum input voltage is 36V volts.The input voltage minimum is 5.5V volts.The maximum current required for its operation is 10μA.
VN610SP Features
Supplied from 13V
Resistance of 10mOhm
VN610SP Applications
There are a lot of STMicroelectronics VN610SP Power Switches ICs applications.
- Storage (HDDs, SSDs)
- Wireless Modem Data Cards
- Wireless/Networking Cards
- Smartphone and PDA
- USB3.1 Power Delivery
- Hot Swap
- PDAs
- Portable GPS
- Set-Top Boxes
- Solid-State Drives
