VN610SP-E
| Parameters | |
|---|---|
| Lifecycle Status | NRND (Last Updated: 8 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | PowerSO-10 Exposed Bottom Pad |
| Number of Pins | 10 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Series | VIPower™ |
| JESD-609 Code | e3 |
| Feature | Auto Restart |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Resistance | 10mOhm |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 139W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 13V |
| Base Part Number | VN610 |
| Pin Count | 10 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 75A |
| Operating Supply Voltage | 13V |
| Supply Voltage-Max (Vsup) | 36V |
| Power Supplies | 8/36V |
| Interface | On/Off |
| Nominal Supply Current | 10μA |
| Output Configuration | High Side |
| Power Dissipation | 139W |
| Output Current | 45A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 50 μs |
| Switch Type | General Purpose |
| Output Current per Channel | 45A |
| Turn-Off Delay Time | 50 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5.5V~36V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Rds On (Typ) | 10m Ω (Max) |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Height Seated (Max) | 3.75mm |
| Length | 9.4mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
VN610SP-E Overview
The package is in the form of a Tube.It is included in the package PowerSO-10 Exposed Bottom Pad.The mounting type of the LED driver is Surface Mount.It owns the General Purpose switch type.Keeping the temperature at -40°C~150°C TJ ensures reliable operation.In this LED driver, there are no outputs available.Operation is based on a supply voltage of Not Required.The maximum output voltage of this LED driver is N-Channel volts.It has a total of Auto Restart features.The VN610 family consists of this type.In total, there are 10 terminations.10 pins are used for operation.Currently, there are 1 functions associated with the lighting driver.In order to meet the operation criteria, the maximum output current drops to 75A.As long as the supply voltage is 13V, high efficiency can be achieved.Surface Mount is mounted in the way of this lighting driver.10 pins are connected to it in total.Currently, the LED driving board has a resistance of 10mOhm ohms.This electrical component is included in the VIPower? series.The output current is set to 45A in this case.It is self-contained in an econtainer with a capacity of Peripheral Drivers.In this case, Vsup (maximum supply voltage) is set to 36V.This part is powered by 8/36V.In order to maximize efficiency, the supply voltage should be set to 13V.
VN610SP-E Features
Supplied from 13V
Resistance of 10mOhm
VN610SP-E Applications
There are a lot of STMicroelectronics VN610SP-E Power Switches ICs applications.
- HDD, SSD
- Portable GPS
- Notebook PC
- Telecom and Network Systems
- Portable Music Players
- Gaming
- HDD and SSD
- Hot Swap
- USB Power Distribution
- Low Voltage I/O System Power
