VN610SP13TR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | PowerSO-10 Exposed Bottom Pad |
| Number of Pins | 10 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Cut Tape (CT) |
| Series | VIPower™ |
| JESD-609 Code | e3 |
| Feature | Auto Restart |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Resistance | 10mOhm |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 139W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 13V |
| Base Part Number | VN610 |
| Pin Count | 10 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 45A |
| Operating Supply Voltage | 36V |
| Interface | On/Off |
| Nominal Supply Current | 10μA |
| Output Configuration | High Side |
| Power Dissipation | 139W |
| Output Current | 45A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 10μA |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 5.5V |
| Max Input Voltage | 36V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5.5V~36V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Rds On (Typ) | 10m Ω (Max) |
| Drain to Source Resistance | 35mOhm |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Height Seated (Max) | 3.75mm |
| Length | 9.4mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
VN610SP13TR Overview
The package is in the form of a Cut Tape (CT).It is included in the package PowerSO-10 Exposed Bottom Pad.The LED driver is mounted as Surface Mount.The switch type of this switch is General Purpose.Ensure reliable operation by setting the temperature to -40°C~150°C TJ.There are 1 outputs available on this lighting driver.The LED driving board is powered by a voltage of Not Required.A maximum output voltage of N-Channel volts can be obtained with this LED driver.Currently, the LED driving board is equipped with Auto Restart features.It is a member of the VN610 family.The termination count is 10.In order to operate, the 10 pins are used.It has 1 functions.As a result, the maximum output current is reduced to 45A in order to meet the operation requirements.The supply voltage of 13V is conducive to high efficiency.In this case, it is mounted in the way of Surface Mount.As a result, it has a total of 10 pins.The LED driver has 10mOhm resistance.Electrical components such as this are included in the VIPower? series.As a result, the output current is set to 45A.There is a Peripheral Drivers capacity container for this LED driver that is self-contained.For maximum efficiency, the supply voltage should be set to 36V.Its maximum input voltage is 36V volts.A minimum input voltage of 5.5V volts is required for this LED driver.It has a maximum current requirement of 10μA.
VN610SP13TR Features
Supplied from 13V
Resistance of 10mOhm
VN610SP13TR Applications
There are a lot of STMicroelectronics VN610SP13TR Power Switches ICs applications.
- Portable Video Game Players
- PC Card Hot Swap
- HDD, SSD
- Portable Devices
- Portable GPS
- Smart Phones, Feature Phones
- USB3.1 Power Delivery
- Wireless Headsets
- Various applications equipped with buttons
- Handheld Devices
