VN610SPTR-E
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | PowerSO-10 Exposed Bottom Pad |
| Number of Pins | 10 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | VIPower™ |
| JESD-609 Code | e3 |
| Feature | Auto Restart |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Resistance | 10mOhm |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 139W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 13V |
| Base Part Number | VN610 |
| Pin Count | 10 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 45A |
| Operating Supply Voltage | 13V |
| Supply Voltage-Max (Vsup) | 36V |
| Power Supplies | 8/36V |
| Interface | On/Off |
| Nominal Supply Current | 10μA |
| Output Configuration | High Side |
| Power Dissipation | 139W |
| Output Current | 45A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 50 μs |
| Switch Type | General Purpose |
| Output Current per Channel | 45A |
| Nominal Input Voltage | 13V |
| Turn-Off Delay Time | 50 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5.5V~36V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Rds On (Typ) | 10m Ω (Max) |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Height Seated (Max) | 3.75mm |
| Length | 9.4mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
VN610SPTR-E Overview
Tape & Reel (TR) is how it's packaged.In the PowerSO-10 Exposed Bottom Pad package, it is included.In this case, the LED driving board is mounted as Surface Mount.There is a switch type of General Purpose.The temperature should be set to -40°C~150°C TJ to ensure reliable functioning.The lighting driver is equipped with 1 outputs that can be used.To operate, it needs a supply voltage of Not Required.There is a maximum output voltage of N-Channel volts on this LED driver.Features of the lighting driver are Auto Restart.I believe it belongs to the VN610 family.It contains 10 terminations.For operation, 10 pins are used.It contains 1 functions.The maximum output current is reduced to 45A to meet the operation criteria.It is possible to obtain high efficiency with a supply voltage of 13V.Surface Mount is mounted in the way of this LED driving board.This LED driver is equipped with a total of 10 pins.Currently, the LED driving board has a resistance of 10mOhm ohms.These electrical components are part of the VIPower? series.The output current is set to 45A in this case.A self-contained container with a capacity of Peripheral Drivers contains this lighting driver.In this case, Vsup (maximum supply voltage) is set to 36V.A 8/36V power supply is used by the part.It is recommended to set the supply voltage to 13V for optimum efficiency.
VN610SPTR-E Features
Supplied from 13V
Resistance of 10mOhm
VN610SPTR-E Applications
There are a lot of STMicroelectronics VN610SPTR-E Power Switches ICs applications.
- Notebook and Tablet Computers
- USB3.1 Power Delivery
- Portable GPS
- Portable/Handheld Devices
- Solid-State Drives
- Wireless Modem Data Cards
- USB Ports/Hubs
- Portable Devices
- Gaming
- Hard Disk Drives
