VN7003ALHTR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mounting Type | Surface Mount |
| Package / Case | OctaPAK (7 leads + Tab) |
| Surface Mount | YES |
| Manufacturer Package Identifier | Octapak-GAPGCFT00665 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100 |
| Feature | Auto Restart |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| Terminal Position | SINGLE |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 13V |
| Terminal Pitch | 0.85mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | VN7003 |
| JESD-30 Code | R-PSSO-G8 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Supply Voltage-Min (Vsup) | 4V |
| Interface | On/Off |
| Current - Output (Max) | 80A |
| Nominal Supply Current | 4mA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Nominal Input Voltage | 28V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 4V~28V |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage, UVLO |
| Rds On (Typ) | 3.5m Ω |
| Max Junction Temperature (Tj) | 150°C |
| Built-in Protections | TRANSIENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SINK |
| Height | 2.55mm |
| Length | 6.5mm |
| RoHS Status | ROHS3 Compliant |
VN7003ALHTR Overview
The LED driver's packaged as a Tape & Reel (TR).There is a package for it in the OctaPAK (7 leads + Tab) package.A Surface Mount mounting is used for the LED driving board.The switch type is General Purpose.The temperature should be set to -40°C~150°C TJ to ensure reliable functioning.It is possible to use 1 outputs in the lighting driver.With a supply voltage of Not Required, the LED driving board operates.The maximum output voltage is N-Channel volts.Features of the lighting driver are Auto Restart.The VN7003 family consists of this type.It has a total of 8 terminations.Currently, the lighting driver has a total of 1 functions.The lighting driver's maximum output is 80AV.As long as the supply voltage is 13V, high efficiency can be achieved.There is an electrical component included in the Automotive, AEC-Q100 series.The supply voltage (Vsup) should be kept above 4V for normal operation.
VN7003ALHTR Features
Supplied from 13V
VN7003ALHTR Applications
There are a lot of STMicroelectronics VN7003ALHTR Power Switches ICs applications.
- Set-top-box
- Hard Disk Drives
- Storage (HDDs, SSDs)
- Portable Music Players
- Wireless/Networking Cards
- HDD, SSD
- Low Voltage I/O System Power
- Notebook and Tablet Computers
- Hot-Swap Systems
- Portable GPS
