VN7010AJ-E
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-PowerLFSOP (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Series | VIPower™ |
| Feature | Auto Restart, Status Flag |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 13V |
| Terminal Pitch | 0.5mm |
| Base Part Number | VN7010 |
| Pin Count | 16 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 65A |
| Supply Voltage-Max (Vsup) | 28V |
| Supply Voltage-Min (Vsup) | 4V |
| Interface | On/Off |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 5mA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 120 μs |
| Switch Type | General Purpose |
| Turn-Off Delay Time | 100 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 4V~28V |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage, UVLO |
| Rds On (Typ) | 10m Ω |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SINK |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
VN7010AJ-E Overview
The LED driver's packaged as a Tube.There is a package for it in the 16-PowerLFSOP (0.154, 3.90mm Width) package.A Surface Mount mounting is used for the LED driving board.It owns General Purpose switch type.Keeping the temperature at -40°C~150°C TJ ensures reliable operation.The lighting driver is equipped with 1 outputs that can be used.The LED driving board operates with a supply voltage of Not Required.A maximum output voltage of N-Channel volts can be achieved by this LED driver.It is equipped with Auto Restart, Status Flag features.It comes under the family of VN7010.It contains 16 terminations.For operation, 16 pins are used.Currently, the lighting driver has a total of 1 functions.The maximum output current drops to 65A in order to meet the operation criteria.High efficiency is possible when the supply voltage is set to 13V.It is mounted in the way of Surface Mount.A total of 16 pins are present on it.It is part of the VIPower? series.The lighting driver is configured to have a maximum supply voltage of 28V (Vsup).For normal operation, the supply voltage (Vsup) must be kept above 4V.For its operation, a maximum current requirement of 5mA is required.
VN7010AJ-E Features
Supplied from 13V
VN7010AJ-E Applications
There are a lot of STMicroelectronics VN7010AJ-E Power Switches ICs applications.
- Wearable Devices
- Portable Devices
- USB Power Distribution
- Portable GPS Device
- Portable Music Players
- Portable/Handheld Devices
- Handheld Devices
- Hot-Swap Systems
- USB Power Distribution
- Hot Swaps
