VN7020AJ-E
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-PowerLFSOP (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Series | VIPower™ |
| Feature | Auto Restart, Status Flag |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 13V |
| Terminal Pitch | 0.5mm |
| Base Part Number | VN7020 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 45A |
| Supply Voltage-Max (Vsup) | 28V |
| Supply Voltage-Min (Vsup) | 4V |
| Interface | On/Off |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 5mA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 120 μs |
| Switch Type | General Purpose |
| Turn-Off Delay Time | 100 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 4V~28V |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage, UVLO |
| Rds On (Typ) | 20m Ω |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SINK |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
VN7020AJ-E Overview
A Tube is used to package it.In the 16-PowerLFSOP (0.154, 3.90mm Width) package, it is included.In this case, the LED driving board is mounted as Surface Mount.There is a switch type of General Purpose.It is recommended that the temperature be set to -40°C~150°C TJ for reliable operation.There are 1 outputs available on this lighting driver.Operation is based on Not Required supply voltage.There is a maximum output voltage of N-Channel volts on this LED driver.Auto Restart, Status Flag features are available on the lighting driver.The VN7020 family consists of this type.A total of 16 terminations have been recorded.The operation is carried out using the 16 pins.Currently, there are 1 functions associated with the lighting driver.The maximum output current is reduced to 45A to meet the operation criteria.Supply voltages of 13V allow for high efficiency.Surface Mount is mounted in the way of this lighting driver.It is included in the VIPower? series.The LED driver is configured with a maximum supply voltage of 28V (Vsup).Normal operation requires Vsup above 4V.The maximum current required for its operation is 5mA.
VN7020AJ-E Features
Supplied from 13V
VN7020AJ-E Applications
There are a lot of STMicroelectronics VN7020AJ-E Power Switches ICs applications.
- Hot Swaps
- USB Power Distribution
- PC Cards
- HDD and SSD
- Solid-State Drives
- USB Protection
- Hot-Swap Systems
- PC Card Hot Swap
- Portable GPS
- Storage (HDDs, SSDs)
