VN7020AJTR-E
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-PowerLFSOP (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Cut Tape (CT) |
| Series | VIPower™ |
| Feature | Auto Restart, Status Flag |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 13V |
| Terminal Pitch | 0.5mm |
| Base Part Number | VN7020 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 45A |
| Supply Voltage-Max (Vsup) | 28V |
| Supply Voltage-Min (Vsup) | 4V |
| Interface | On/Off |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 5mA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 120 μs |
| Switch Type | General Purpose |
| Turn-Off Delay Time | 100 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 4V~28V |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage, UVLO |
| Rds On (Typ) | 20m Ω |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SINK |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
VN7020AJTR-E Overview
It is packaged in the form of a Cut Tape (CT).There is a package for it in the 16-PowerLFSOP (0.154, 3.90mm Width) package.The LED driver is mounted as Surface Mount.General Purpose is the switch type that it owns.Keeping the temperature at -40°C~150°C TJ ensures reliable operation.There are 1 outputs available on this lighting driver.With a supply voltage of Not Required, the LED driving board operates.Voltage output is N-Channel volts at maximum.It has a total of Auto Restart, Status Flag features.It is part of the VN7020 family of LED drivers.A total of 16 terminations can be found in it.The operation is carried out using the 16 pins.The LED driving board has a total of 1 functions.The maximum output current drops to 45A in order to meet the operation criteria.It is possible to achieve a high level of efficiency with a supply voltage of 13V.Surface Mount is mounted in the way.This electrical component is part of the VIPower? series.The LED driver is configured with a maximum supply voltage of 28V (Vsup).Normal operation requires Vsup above 4V.It operates at a maximum current of 5mA.
VN7020AJTR-E Features
Supplied from 13V
VN7020AJTR-E Applications
There are a lot of STMicroelectronics VN7020AJTR-E Power Switches ICs applications.
- PC Card Hot Swap
- USB Protection
- Wireless Modem Data Cards
- Wireless/Networking Cards
- Portable GPS
- USB Ports/Hubs
- Solid-State Drives
- Wearable Devices
- Portable/Handheld Devices
- Low Voltage I/O System Power
