VN7040AS-E
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Series | VIPower™ |
| Feature | Auto Restart, Status Flag |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 13V |
| Base Part Number | VN7040 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 24A |
| Supply Voltage-Min (Vsup) | 4V |
| Interface | On/Off |
| Nominal Supply Current | 3mA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 5mA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 120 μs |
| Switch Type | General Purpose |
| Turn-Off Delay Time | 100 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 4V~28V |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage, UVLO |
| Rds On (Typ) | 40m Ω |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SINK |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
VN7040AS-E Overview
It is package in Tube case.The 8-SOIC (0.154, 3.90mm Width) package contains it.Mounting type Surface Mount is selected for the LED driving board.General Purpose is the switch type it owns.It is recommended to set the temperature to -40°C~150°C TJ in order to ensure reliable operation.There are 1 outputs available on this lighting driver.A voltage of Not Required is used to power it.There is a maximum output voltage of N-Channel volts.Auto Restart, Status Flag features are available on the lighting driver.It belongs to the family VN7040.A total of 8 terminations have been recorded.The operation is performed through the 8 pins.There are 1 functions of the LED driver.The maximum output current must drop to 24A to meet the operation criteria.It is possible to obtain high efficiency with a supply voltage of 13V.The lighting driver is mounted in the direction of Surface Mount.Electrical components such as this are included in the VIPower? series.Normal operation requires a voltage above 4V for the supply voltage.5mA is the maximum current required to operate it.
VN7040AS-E Features
Supplied from 13V
VN7040AS-E Applications
There are a lot of STMicroelectronics VN7040AS-E Power Switches ICs applications.
- Gaming
- Notebook PC
- Storage Drives
- USB Ports/Hubs
- Portable/Handheld Devices
- HDD, SSD
- Wireless Modem Data Cards
- USB3.1 Power Delivery
- Low Voltage I/O System Power
- PC Card Hot Swap
