VN7140AJ-E
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-PowerLFSOP (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Series | VIPower™ |
| Feature | Auto Restart, Status Flag |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 13V |
| Terminal Pitch | 0.5mm |
| Base Part Number | VN7140 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 8A |
| Supply Voltage-Max (Vsup) | 28V |
| Supply Voltage-Min (Vsup) | 4V |
| Interface | On/Off |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 5mA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 120 μs |
| Switch Type | General Purpose |
| Turn-Off Delay Time | 100 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 4V~28V |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage, UVLO |
| Rds On (Typ) | 140m Ω |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SINK |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
VN7140AJ-E Overview
Tube is the way it's packaged.The 16-PowerLFSOP (0.154, 3.90mm Width) package includes it.This LED driving board is mounted using the mounting type Surface Mount.This switch is of type General Purpose.The temperature should be set to -40°C~150°C TJ to ensure reliable functioning.There are 1 outputs available on this lighting driver.In order to operate, it requires a voltage supply of Not Required.A maximum output voltage of N-Channel volts has been specified.As far as features are concerned, the LED driving board has Auto Restart, Status Flag.It belongs to the family VN7140.There are 16 terminations in it.For operation, 16 pins are used.Currently, there are 1 functions associated with the lighting driver.The maximum output current must drop to 8A to meet the operation criteria.The supply voltage can be 13V for high efficiency.It is positioned in the direction of Surface Mount.These electrical components are part of the VIPower? series.This LED driver is configured to have a maximum supply voltage of 28V (Vsup).In order for this lighting driver to operate normally, the supply voltage (Vsup) should remain above 4V.It requires a maximum current requirement of 5mA.
VN7140AJ-E Features
Supplied from 13V
VN7140AJ-E Applications
There are a lot of STMicroelectronics VN7140AJ-E Power Switches ICs applications.
- Solid-State Drives
- Portable Devices
- Wireless Headsets
- USB3.1 Power Delivery
- PDAs
- Hot Swap
- Storage (HDDs, SSDs)
- Portable GPS
- Solid State Drivers
- Wireless/Networking Cards
