VN7140ASTR-E
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Supplier Device Package | 8-SO |
| Weight | 124.596154mg |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Cut Tape (CT) |
| Series | VIPower™ |
| Feature | Auto Restart, Status Flag |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Max Operating Temperature | 150°C |
| Min Operating Temperature | -40°C |
| Base Part Number | VN7140 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 8A |
| Voltage | 28V |
| Interface | On/Off |
| Max Supply Voltage | 28V |
| Min Supply Voltage | 4V |
| Operating Supply Current | 3mA |
| Current - Output (Max) | 8A |
| Element Configuration | Single |
| Current | 12A |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 5mA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 70 μs |
| Switch Type | General Purpose |
| Turn-Off Delay Time | 100 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 4V~28V |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage, UVLO |
| Number of Drivers | 1 |
| Rds On (Typ) | 140mOhm |
| Height | 1.25mm |
| Length | 5mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
VN7140ASTR-E Overview
It's?packaged?in?the way?of?a?Cut Tape (CT).It is included in the package 8-SOIC (0.154, 3.90mm Width).The LED driver is mounted as Surface Mount.There is a General Purpose switch type associated with it.It is recommended that the temperature be set to -40°C~150°C TJ for reliable performance.By default, it is set to output 1.A voltage of Not Required is used to power it.There is a maximum output voltage of N-Channel volts on this LED driver.Currently, the LED driving board is equipped with Auto Restart, Status Flag features.I believe it belongs to the VN7140 family.During operation, the 8 pins are used.The lighting driver's maximum output is 8AV.It is necessary to reduce the maximum output current to 8A to meet the operation criteria.This lighting driver is mounted in the way of Surface Mount.A component of this type is included in the VIPower? series.A maximum operating temperature of 150°C°C is required for stable operation.A minimum working temperature of -40°C degrees Celsius is required to ensure its reliability.It operates at a maximum current of 5mA.There is a maximum supply voltage of 28VV that it is capable of handling.You can also run it at 4V volts if required.A total of 1 drivers are included in this part.
VN7140ASTR-E Features
VN7140ASTR-E Applications
There are a lot of STMicroelectronics VN7140ASTR-E Power Switches ICs applications.
- Wireless Modem Data Cards
- Portable GPS
- USB Protection
- Portable/Handheld Devices
- Mobile Communication Devices
- Portable Music Players
- Portable Video Game Players
- Gaming
- Solid State Drivers
- PC Card Hot Swap
