VN750-12-E
| Parameters | |
|---|---|
| Max Supply Current | 3.5mA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 40 μs |
| Switch Type | General Purpose |
| Turn-Off Delay Time | 30 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5.5V~36V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Output Peak Current Limit-Nom | 9A |
| Rds On (Typ) | 60m Ω (Max) |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | Pentawatt-5 (Straight Leads, Staggered Depth) |
| Number of Pins | 5 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Series | VIPower™ |
| JESD-609 Code | e3 |
| Feature | Auto Restart, Status Flag |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Resistance | 60mOhm |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 4.2W |
| Terminal Position | SINGLE |
| Number of Functions | 1 |
| Supply Voltage | 13V |
| Base Part Number | VN750 |
| Pin Count | 5 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 6A |
| Operating Supply Voltage | 13V |
| Supply Voltage-Max (Vsup) | 36V |
| Power Supplies | 8/36V |
| Interface | On/Off |
| Nominal Supply Current | 3.5mA |
| Output Configuration | High Side |
| Power Dissipation | 60W |
| Output Current | 6A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
VN750-12-E Overview
Tube is the way it's packaged.There is a package for it in the Pentawatt-5 (Straight Leads, Staggered Depth) package.Through Hole is the mounting type of the LED driver.General Purpose is the switch type that it owns.It is recommended that the temperature be set to -40°C~150°C TJ for reliable operation.It is possible to use 1 outputs in the lighting driver.To operate, it needs a supply voltage of Not Required.The maximum output voltage is N-Channel volts.It is equipped with Auto Restart, Status Flag features.The VN750 family contains this object.It contains 5 terminations.The operation is carried out using the 5 pins.Currently, the lighting driver has a total of 1 functions.In order to meet the operation criteria, the maximum output current drops to 6A.With a supply voltage of 13V, high efficiency is possible.Through Hole is mounted in the way of this LED driving board.A total of 5 pins are present on it.In this case, there is 60mOhm resistance in the LED driving board.This electrical component can be found in the VIPower? series.When this is the case, the output current is set to 6A.A self-contained LED driver with a capacity of Peripheral Drivers is contained in an econtainer.In this LED driver, the maximum supply voltage is configured to be 36V (Vsup).There is a voltage supply of 8/36V volts on this part.Optimal efficiency requires a voltage of 13V.It requires a maximum current requirement of 3.5mA.
VN750-12-E Features
Supplied from 13V
Resistance of 60mOhm
VN750-12-E Applications
There are a lot of STMicroelectronics VN750-12-E Power Switches ICs applications.
- USB Power Distribution
- Notebook PC
- Wearable Devices
- Low Voltage I/O System Power
- USB Protection
- Notebook and Tablet Computers
- Hot Swaps
- Hard Disk Drives
- Hot-Swap Systems
- Gaming
