VN750
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | Pentawatt-5 (Vertical, Bent and Staggered Leads) |
| Number of Pins | 5 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Series | VIPower™ |
| JESD-609 Code | e3 |
| Feature | Auto Restart, Status Flag |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Resistance | 60mOhm |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 60W |
| Terminal Position | ZIG-ZAG |
| Number of Functions | 1 |
| Supply Voltage | 13V |
| Base Part Number | VN750 |
| Pin Count | 5 |
| Output Type | N-Channel |
| Max Output Current | 6A |
| Operating Supply Voltage | 13V |
| Supply Voltage-Max (Vsup) | 36V |
| Power Supplies | 8/36V |
| Interface | On/Off |
| Nominal Supply Current | 2mA |
| Output Configuration | High Side |
| Power Dissipation | 60W |
| Output Current | 6A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 3.5mA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 40 μs |
| Switch Type | General Purpose |
| Turn-Off Delay Time | 30 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5.5V~36V |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Number of Drivers | 1 |
| Output Peak Current Limit-Nom | 9A |
| Rds On (Typ) | 60m Ω (Max) |
| Drain to Source Resistance | 120mOhm |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
VN750 Overview
Tube is the way it's packaged.The Pentawatt-5 (Vertical, Bent and Staggered Leads) package includes it.The lighting driver has the mounting type Through Hole.It owns the General Purpose switch type.The temperature should be set to -40°C~150°C TJ to ensure reliable functioning.Operation is based on a supply voltage of Not Required.There is a maximum output voltage of N-Channel volts.It has a total of Auto Restart, Status Flag features.The VN750 family consists of this type.In total, there are 5 terminations.The 5 pins are used for the operation of the system.Currently, the lighting driver has a total of 1 functions.To comply with the operation criteria, the maximum output current is reduced to 6A.Supply voltages of 13V allow for high efficiency.This lighting driver is mounted in the way of Through Hole.There are 5 pins in total on this board.The LED driver has 60mOhm resistance.This electrical component is part of the VIPower? series.When this case is used, the output current is set to 6A.There is a Peripheral Drivers capacity container for this LED driver that is self-contained.In this case, Vsup (maximum supply voltage) is set to 36V.The power supply of the part is 8/36V.For maximum efficiency, the supply voltage should be set to 13V.For its operation, a maximum current requirement of 3.5mA is required.1 drivers are available for the part.
VN750 Features
Supplied from 13V
Resistance of 60mOhm
VN750 Applications
There are a lot of STMicroelectronics VN750 Power Switches ICs applications.
- Storage (HDDs, SSDs)
- Telecom and Network Systems
- Smart Phones, Feature Phones
- Hard Disk Drives
- HDD, SSD
- USB Ports/Hubs
- Mobile Communication Devices
- USB3.1 Power Delivery
- Portable Devices
- Low Voltage I/O System Power
