VN750-B513TR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | P2PAK (4 Leads + Tab) |
| Number of Pins | 5 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | VIPower™ |
| JESD-609 Code | e0 |
| Feature | Auto Restart, Status Flag |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 4 |
| ECCN Code | EAR99 |
| Resistance | 60mOhm |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 60W |
| Terminal Position | SINGLE |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 13V |
| Base Part Number | VN750 |
| Pin Count | 4 |
| JESD-30 Code | R-PSSO-G4 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 6A |
| Supply Voltage-Max (Vsup) | 36V |
| Power Supplies | 8/36V |
| Interface | On/Off |
| Nominal Supply Current | 25mA |
| Output Configuration | High Side |
| Power Dissipation | 60W |
| Output Current | 6A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 3.5mA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 40 μs |
| Switch Type | General Purpose |
| Turn-Off Delay Time | 30 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5.5V~36V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Output Peak Current Limit-Nom | 9A |
| Rds On (Typ) | 60m Ω (Max) |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
VN750-B513TR Overview
As a result, it is packaged in the form of a Tape & Reel (TR).In the P2PAK (4 Leads + Tab) package, it is included.The lighting driver is mounted in the Surface Mount position.It owns General Purpose switch type.It is recommended to set the temperature to -40°C~150°C TJ in order to ensure reliable operation.By default, it is set to output 1.With a supply voltage of Not Required, the LED driving board operates.The maximum output voltage of this LED driver is N-Channel volts.A lighting driver with Auto Restart, Status Flag features is available.It belongs to the family VN750.The termination count is 4.The operation is carried out using the 5 pins.It consists of 1 functions.It is necessary to reduce the maximum output current to 6A to meet the operation criteria.As long as the supply voltage is 13V, high efficiency can be achieved.The lighting driver is mounted in the direction of Surface Mount.In total, it has 4 pins.In this LED driving board, there is 60mOhm resistance.It is part of the VIPower? series.This case has the output current set to 6A.A self-contained econtainer holding Peripheral Drivers capacity contains this lighting driver.The maximum supply voltage is set to 36V.In this part, the power supply is set to 8/36V.It requires a maximum current requirement of 3.5mA.
VN750-B513TR Features
Supplied from 13V
Resistance of 60mOhm
VN750-B513TR Applications
There are a lot of STMicroelectronics VN750-B513TR Power Switches ICs applications.
- USB Protection
- Various applications equipped with buttons
- Notebook PC
- Solid State Drivers
- Telecom and Network Systems
- Gaming
- Portable Video Game Players
- Smartphone and PDA
- Portable GPS
- Smart Phones, Feature Phones
