VN750-E
| Parameters | |
|---|---|
| Lifecycle Status | ACTIVE (Last Updated: 8 months ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | Pentawatt-5 (Vertical, Bent and Staggered Leads) |
| Number of Pins | 5 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Series | VIPower™ |
| JESD-609 Code | e3 |
| Feature | Auto Restart, Status Flag |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Resistance | 60mOhm |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 4.2W |
| Terminal Position | ZIG-ZAG |
| Number of Functions | 1 |
| Supply Voltage | 13V |
| Base Part Number | VN750 |
| Pin Count | 5 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 6A |
| Operating Supply Voltage | 13V |
| Supply Voltage-Max (Vsup) | 36V |
| Power Supplies | 8/36V |
| Interface | On/Off |
| Operating Supply Current | 3.5mA |
| Nominal Supply Current | 2mA |
| Output Configuration | High Side |
| Power Dissipation | 60W |
| Output Current | 6A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 3.5mA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 40 μs |
| Switch Type | General Purpose |
| Turn-Off Delay Time | 30 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5.5V~36V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Output Peak Current Limit-Nom | 9A |
| Rds On (Typ) | 60m Ω (Max) |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Height | 9.2mm |
| Length | 10.4mm |
| Width | 4.8mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
VN750-E Overview
It is package in Tube case.It's included in the Pentawatt-5 (Vertical, Bent and Staggered Leads) package.The LED driver is mounted as Through Hole.A General Purpose switch type is owned by it.Ensure reliable operation by setting the temperature to -40°C~150°C TJ.The lighting driver is equipped with 1 outputs that can be used.A supply voltage of Not Required is required for it to operate.It has a maximum output voltage of N-Channel volts.A lighting driver with Auto Restart, Status Flag features is available.It is a member of the VN750 family.The termination count is 5.In order to operate, the 5 pins are used.It contains 1 functions.It is necessary to reduce the maximum output current to 6A to meet the operation criteria.It is possible to obtain high efficiency with a supply voltage of 13V.Through Hole is mounted in the way of this lighting driver.A total of 5 pins are included in this LED driver.Currently, the LED driving board has 60mOhm resistance.Electrical components such as this are included in the VIPower? series.This case results in a 6A output current.A self-contained container with a capacity of Peripheral Drivers contains this lighting driver.The maximum supply voltage for this lighting driver is set to 36V (Vsup).The power supply of the part is 8/36V.When using this LED driving board, it is recommended that the supply voltage is set to 13V.The maximum current required for its operation is 3.5mA.
VN750-E Features
Supplied from 13V
Resistance of 60mOhm
VN750-E Applications
There are a lot of STMicroelectronics VN750-E Power Switches ICs applications.
- USB Power Distribution
- Set-top-box
- Storage (HDDs, SSDs)
- PC Card Hot Swap
- Storage Drives
- USB Ports/Hubs
- Hot Swap
- HDD and SSD
- Hot Swap
- Smart Phones, Feature Phones
