VN750PEP-E
| Parameters | |
|---|---|
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 12 |
| ECCN Code | EAR99 |
| Resistance | 60mOhm |
| Subcategory | Peripheral Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 13V |
| Terminal Pitch | 0.8mm |
| Base Part Number | VN750 |
| Pin Count | 12 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Supply Voltage-Max (Vsup) | 36V |
| Power Supplies | 8/36V |
| Supply Voltage-Min (Vsup) | 5.5V |
| Interface | On/Off |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Output Current-Max | 6A |
| Output Current per Channel | 6A |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5.5V~36V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Output Peak Current Limit-Nom | 9A |
| Rds On (Typ) | 60m Ω (Max) |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SOURCE |
| Length | 5mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | PowerSSO-12 |
| Number of Pins | 12 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Series | VIPower™ |
| Feature | Auto Restart, Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
VN750PEP-E Overview
It's?packaged?in?the way?of?a?Tube.It is included with the PowerSSO-12 package as well.Surface Mount is the mounting type of the LED driver.This switch is of type General Purpose.To ensure reliable operation, set the temperature to -40°C~150°C TJ.The lighting driver has a total of 1 outputs that are available for use.The LED driving board operates with a supply voltage of Not Required.A maximum output voltage of N-Channel volts can be obtained with this LED driver.Auto Restart, Status Flag features are available on the lighting driver.It belongs to the family VN750.A total of 12 terminations can be found in it.It is necessary to use the 12 pins in order to operate the LED driver.As far as the lighting driver is concerned, there are 1 functions.As long as the supply voltage is 13V, high efficiency can be achieved.The LED driving board is mounted in the way of Surface Mount.A total of 12 pins are present on it.Lighting drivers with 60mOhm resistance are used.This electrical component can be found in the VIPower? series.Self-contained LED driver with Peripheral Drivers capacity in an econtainer.The maximum supply voltage for this lighting driver is set to 36V (Vsup).In order for the lighting driver to operate normally, the supply voltage (Vsup) should be maintained above 5.5V.This part has a power supply of 8/36V.
VN750PEP-E Features
Supplied from 13V
Resistance of 60mOhm
VN750PEP-E Applications
There are a lot of STMicroelectronics VN750PEP-E Power Switches ICs applications.
- Portable/Handheld Devices
- Low Voltage I/O System Power
- Storage Drives
- Portable Video Game Players
- Set-Top Boxes
- Wireless Modem Data Cards
- Portable GPS Device
- Solid-State Drives
- Handheld Devices
- Wearable Devices
