VN750PEPTR-E
| Parameters | |
|---|---|
| Power Supplies | 8/36V |
| Supply Voltage-Min (Vsup) | 5.5V |
| Interface | On/Off |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Output Current-Max | 6A |
| Output Current per Channel | 6A |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5.5V~36V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Output Peak Current Limit-Nom | 9A |
| Rds On (Typ) | 60m Ω (Max) |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SOURCE |
| Length | 5mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | PowerSSO-12 |
| Number of Pins | 12 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | VIPower™ |
| Feature | Auto Restart, Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 12 |
| ECCN Code | EAR99 |
| Resistance | 60mOhm |
| Subcategory | Peripheral Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 13V |
| Terminal Pitch | 0.8mm |
| Base Part Number | VN750 |
| Pin Count | 12 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Supply Voltage-Max (Vsup) | 36V |
VN750PEPTR-E Overview
It is packaged in the form of a Tape & Reel (TR).In the PowerSSO-12 package, it is included.The lighting driver is mounted in the Surface Mount position.The switch type of this switch is General Purpose.It is recommended that the temperature be set to -40°C~150°C TJ for reliable operation.The LED driver has 1 outputs.A voltage of Not Required is used to power it.There is a maximum output voltage of N-Channel volts on this LED driver.Currently, the LED driving board is equipped with Auto Restart, Status Flag features.The VN750 family contains this object.As a result, there are 12 terminations.It is necessary to use the 12 pins in order to operate the LED driver.It consists of 1 functions.A supply voltage of 13V leads to high efficiency.In this case, it is mounted in the way of Surface Mount.This LED driver is equipped with a total of 12 pins.In this LED driving board, there is 60mOhm resistance.This electrical component can be found in the VIPower? series.A self-contained LED driver with a capacity of Peripheral Drivers is contained in an econtainer.Vsup (maximum supply voltage) is set to 36V.To maintain a normal operation, the supply voltage (Vsup) must be maintained above 5.5V.The power supply of the part is 8/36V.
VN750PEPTR-E Features
Supplied from 13V
Resistance of 60mOhm
VN750PEPTR-E Applications
There are a lot of STMicroelectronics VN750PEPTR-E Power Switches ICs applications.
- Portable Music Players
- Set-Top Boxes
- Hot Swap
- HDD, SSD
- Smart Phones, Feature Phones
- Storage (HDDs, SSDs)
- PDAs
- Storage Drives
- Hot Swaps
- USB Power Distribution
