VN750PS-E
| Parameters | |
|---|---|
| Lifecycle Status | NRND (Last Updated: 8 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Series | VIPower™ |
| JESD-609 Code | e3 |
| Feature | Auto Restart, Status Flag |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 60mOhm |
| Terminal Finish | Tin (Sn) |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 4.2W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 13V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | VN750 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 6A |
| Interface | On/Off |
| Nominal Supply Current | 2mA |
| Output Configuration | High Side |
| Power Dissipation | 4.2W |
| Output Current | 6A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 3.5mA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 40 μs |
| Switch Type | General Purpose |
| Min Input Voltage | 5.5V |
| Max Input Voltage | 36V |
| Output Current per Channel | 6A |
| Nominal Input Voltage | 13V |
| Turn-Off Delay Time | 30 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5.5V~36V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Output Peak Current Limit-Nom | 9A |
| Rds On (Typ) | 60m Ω (Max) |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
VN750PS-E Overview
It is packaged in the manner of a Tube.It's included in the 8-SOIC (0.154, 3.90mm Width) package.Mounting type Surface Mount is selected for the LED driving board.The switch type is General Purpose.To ensure reliable performance, the temperature should be set to -40°C~150°C TJ.It is possible to use 1 outputs in the lighting driver.A supply voltage of Not Required is required for it to operate.A maximum voltage of N-Channel volts is available from the output of this LED driver.In terms of features, the LED driving board has Auto Restart, Status Flag.It belongs to the VN750 family.A total of 8 terminations have been found in it.For operation, we use the 8 pins.It consists of 1 functions.This results in the maximum output current dropping to 6A to meet the operation criteria.With a supply voltage of 13V, high efficiency is possible.This lighting driver is mounted in the way of Surface Mount.A total of 8 pins are present on it.In this case, there is 60mOhm resistance in the LED driving board.This electrical component is included in the VIPower? series.When this case is used, the output current is set to 6A.There is a Peripheral Drivers capacity container for this LED driver that is self-contained.It has a maximum input voltage of 36V volts.The input voltage minimum is 5.5V volts.There is a maximum current requirement of 3.5mA for its operation.
VN750PS-E Features
Supplied from 13V
Resistance of 60mOhm
VN750PS-E Applications
There are a lot of STMicroelectronics VN750PS-E Power Switches ICs applications.
- Portable Music Players
- Storage Drives
- Portable Video Game Players
- Wireless Modem Data Cards
- Hot Swaps
- HDD and SSD
- Portable GPS
- Set-Top Boxes
- Hard Disk Drives
- Storage (HDDs, SSDs)
