VN750PSTR-E
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | VIPower™ |
| JESD-609 Code | e3 |
| Feature | Auto Restart, Status Flag |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 60mOhm |
| Terminal Finish | Tin (Sn) |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 4.2W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 13V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | VN750 |
| Pin Count | 8 |
| Output Voltage | 36V |
| Output Type | N-Channel |
| Max Output Current | 6A |
| Voltage | 36V |
| Interface | On/Off |
| Nominal Supply Current | 2mA |
| Current | 9A |
| Output Configuration | High Side |
| Power Dissipation | 4.2W |
| Output Current | 6A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 3.5mA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 40 μs |
| Switch Type | General Purpose |
| Min Input Voltage | 5.5V |
| Max Input Voltage | 36V |
| Output Current per Channel | 6A |
| Turn-Off Delay Time | 30 μs |
| Output Polarity | TRUE |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5.5V~36V |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Number of Drivers | 1 |
| Output Peak Current Limit-Nom | 9A |
| Rds On (Typ) | 60m Ω (Max) |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| On-State Resistance | 60mOhm |
| Height | 1.75mm |
| Length | 5mm |
| Width | 4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
VN750PSTR-E Overview
It is package in Tape & Reel (TR) case.In the 8-SOIC (0.154, 3.90mm Width) package, it is included.A Surface Mount mounting is used for the LED driving board.There is a switch type of General Purpose.To ensure reliable operation, set the temperature to -40°C~150°C TJ.To operate, it needs a supply voltage of Not Required.It produces a maximum output voltage of N-Channel volts at its maximum output.Features of the lighting driver are Auto Restart, Status Flag.It belongs to the family VN750.A total of 8 terminations have been recorded.For operation, we use the 8 pins.The LED driving board has a total of 1 functions.Maximum output current falls to 6A when operation criteria are met.High efficiency is possible when the supply voltage is set to 13V.The LED driving board is mounted in the way of Surface Mount.There are 8 pins in total on this board.Currently, the LED driving board has a resistance of 60mOhm ohms.It belongs to the VIPower? series.The output current is set to 6A in this case.A self-contained container with a capacity of Peripheral Drivers contains this lighting driver.Its maximum input voltage is 36V volts.A minimum input voltage of 5.5V volts is required for this LED driver.It operates at a maximum current of 3.5mA.It has 1 drivers.
VN750PSTR-E Features
Supplied from 13V
Resistance of 60mOhm
VN750PSTR-E Applications
There are a lot of STMicroelectronics VN750PSTR-E Power Switches ICs applications.
- Solid State Drivers
- Hard Disk Drives
- Smartphone and PDA
- HDD and SSD
- Telecom and Network Systems
- Notebook PC
- Wireless/Networking Cards
- USB Power Distribution
- Notebook and Tablet Computers
- Portable GPS Device
