VN750PT
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-252-5, DPak (4 Leads + Tab), TO-252AD |
| Number of Pins | 5 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Series | VIPower™ |
| JESD-609 Code | e0 |
| Feature | Auto Restart, Status Flag |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 4 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 60W |
| Terminal Position | SINGLE |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 13V |
| Base Part Number | VN750 |
| Pin Count | 4 |
| JESD-30 Code | R-PSSO-G4 |
| Output Type | N-Channel |
| Max Output Current | 6A |
| Supply Voltage-Max (Vsup) | 36V |
| Power Supplies | 8/36V |
| Interface | On/Off |
| Nominal Supply Current | 25mA |
| Output Configuration | High Side |
| Power Dissipation | 60W |
| Output Current | 6A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 3.5mA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 40 μs |
| Switch Type | General Purpose |
| Turn-Off Delay Time | 30 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5.5V~36V |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Number of Drivers | 1 |
| Output Peak Current Limit-Nom | 9A |
| Rds On (Typ) | 60m Ω (Max) |
| Drain to Source Resistance | 120mOhm |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Height Seated (Max) | 2.63mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
VN750PT Overview
The package is in the form of a Tube.It is included with the TO-252-5, DPak (4 Leads + Tab), TO-252AD package as well.A Surface Mount mounting is used for the LED driving board.There is a switch type of General Purpose.Ensure reliable operation by setting the temperature to -40°C~150°C TJ.Operation is based on Not Required supply voltage.It has a maximum output voltage of N-Channel volts.A lighting driver with Auto Restart, Status Flag features is available.It belongs to the family VN750.There are 4 terminations in it.The operation is carried out using the 5 pins.It contains 1 functions.The maximum output current must drop to 6A to meet the operation criteria.With a supply voltage of 13V, high efficiency is possible.The LED driving board is mounted in the way of Surface Mount.The LED driving board is equipped with a total of 4 pins.There is an electrical component included in the VIPower? series.In this case, the output current will be set to 6A.Self-contained in an econtainer with a capacity of Peripheral Drivers, this LED driver is self-contained.In this case, Vsup (maximum supply voltage) is set to 36V.This part has a power supply of 8/36V.A maximum current requirement of 3.5mA is required for its operation.It is equipped with 1 drivers.
VN750PT Features
Supplied from 13V
VN750PT Applications
There are a lot of STMicroelectronics VN750PT Power Switches ICs applications.
- USB Power Distribution
- HDD and SSD
- Notebook and Tablet Computers
- PC Card Hot Swap
- Storage (HDDs, SSDs)
- Portable GPS Device
- USB3.1 Power Delivery
- USB Ports/Hubs
- Portable Devices
- Hot Swap
