Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 7 months ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
TO-252-5, DPak (4 Leads + Tab), TO-252AD |
Number of Pins |
5 |
Weight |
4.535924g |
Operating Temperature |
-40°C~150°C TJ |
Packaging |
Tube |
Series |
VIPower™ |
JESD-609 Code |
e3 |
Feature |
Auto Restart, Status Flag |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
Number of Terminations |
5 |
ECCN Code |
EAR99 |
Resistance |
60mOhm |
Terminal Finish |
Matte Tin (Sn) - annealed |
Subcategory |
Peripheral Drivers |
Max Power Dissipation |
60W |
Terminal Position |
SINGLE |
Terminal Form |
GULL WING |
Number of Functions |
1 |
Supply Voltage |
13V |
Base Part Number |
VN750 |
Pin Count |
5 |
Output Type |
N-Channel |
Max Output Current |
6A |
Operating Supply Voltage |
13V |
Supply Voltage-Max (Vsup) |
36V |
Power Supplies |
8/36V |
Interface |
On/Off |
Nominal Supply Current |
2mA |
Output Configuration |
High Side |
Power Dissipation |
60W |
Output Current |
6A |
Voltage - Supply (Vcc/Vdd) |
Not Required |
Max Supply Current |
3.5mA |
Input Type |
Non-Inverting |
Turn On Delay Time |
40 μs |
Switch Type |
General Purpose |
Output Current per Channel |
6A |
Turn-Off Delay Time |
30 μs |
Ratio - Input:Output |
1:1 |
Voltage - Load |
5.5V~36V |
Fault Protection |
Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
Number of Drivers |
1 |
Output Peak Current Limit-Nom |
9A |
Rds On (Typ) |
60m Ω (Max) |
Built-in Protections |
TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
On-State Resistance |
60mOhm |
Height |
2.63mm |
Length |
6.6mm |
Width |
6.2mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
VN750PT-E Overview
It is package in Tube case.The TO-252-5, DPak (4 Leads + Tab), TO-252AD package includes it.The lighting driver has the mounting type Surface Mount.General Purpose is the type of switch owned by it.It is recommended to set the temperature to -40°C~150°C TJ in order to ensure reliable operation.Operation is based on Not Required supply voltage.It has a maximum output voltage of N-Channel volts.There are Auto Restart, Status Flag features available on the LED driving board.It belongs to the VN750 family.A total of 5 terminations have been found in it.The operation is performed through the 5 pins.It is important to note that the LED driving board has 1 functions.As a result, the maximum output current is reduced to 6A in order to meet the operation requirements.With a supply voltage of 13V, high efficiency is possible.Surface Mount is mounted in the way of this lighting driver.As a result, it has a total of 5 pins.Currently, the LED driving board has a resistance of 60mOhm ohms.It is included in the VIPower? series.In this case, the output current will be set to 6A.Self-contained in an econtainer with a capacity of Peripheral Drivers, this LED driver is self-contained.The lighting driver is configured to have a maximum supply voltage of 36V (Vsup).8/36V is the power supply of the part.A supply voltage of 13V is recommended for maximum efficiency.This system has a maximum current requirement of 3.5mA.There are 1 drivers associated with this part.
VN750PT-E Features
Supplied from 13V
Resistance of 60mOhm
VN750PT-E Applications
There are a lot of STMicroelectronics VN750PT-E Power Switches ICs applications.
- Hot-Swap Systems
- Storage Drives
- Wearable Devices
- USB Power Distribution
- Notebook and Tablet Computers
- Smartphone and PDA
- Portable Video Game Players
- Telecom and Network Systems
- Portable/Handheld Devices
- PC Cards