VN750PT13TR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-252-5, DPak (4 Leads + Tab), TO-252AD |
| Number of Pins | 5 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | VIPower™ |
| JESD-609 Code | e0 |
| Feature | Auto Restart, Status Flag |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 4 |
| ECCN Code | EAR99 |
| Resistance | 60mOhm |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 60W |
| Terminal Position | SINGLE |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 13V |
| Base Part Number | VN750 |
| Pin Count | 4 |
| JESD-30 Code | R-PSSO-G4 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 6A |
| Operating Supply Voltage | 13V |
| Supply Voltage-Max (Vsup) | 36V |
| Power Supplies | 8/36V |
| Interface | On/Off |
| Nominal Supply Current | 2mA |
| Output Configuration | High Side |
| Power Dissipation | 60W |
| Output Current | 6A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 3.5mA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 40 μs |
| Switch Type | General Purpose |
| Output Current per Channel | 6A |
| Turn-Off Delay Time | 30 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5.5V~36V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Output Peak Current Limit-Nom | 9A |
| Rds On (Typ) | 60m Ω (Max) |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Height Seated (Max) | 2.63mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
VN750PT13TR Overview
Tape & Reel (TR) is the way it's packaged.There is a package for it in the TO-252-5, DPak (4 Leads + Tab), TO-252AD package.This lighting drivere has a mounting type of Surface Mount.It owns General Purpose switch type.It is recommended to set the temperature to -40°C~150°C TJ in order to ensure reliable operation.There is a default setting of 1 for output.The LED driving board operates at Not Required volts.A maximum voltage of N-Channel volts is available from the output of this LED driver.The lighting driver has Auto Restart, Status Flag features.It belongs to the family VN750.It has a total of 4 terminations.In order to operate, the 5 pins are used.It has 1 functions.The maximum output current drops to 6A in order to meet the operation criteria.High efficiency is possible when the supply voltage is set to 13V.It is mounted in the way of Surface Mount.It is equipped with a total of 4 pins.It has 60mOhm resistance.This electrical component can be found in the VIPower? series.When this case is used, the output current is set to 6A.A self-contained container with a capacity of Peripheral Drivers contains this lighting driver.Vsup (maximum supply voltage) is set to 36V.A 8/36V power supply is used by the part.For maximum efficiency, the supply voltage should be set to 13V.It requires a maximum current requirement of 3.5mA.
VN750PT13TR Features
Supplied from 13V
Resistance of 60mOhm
VN750PT13TR Applications
There are a lot of STMicroelectronics VN750PT13TR Power Switches ICs applications.
- Wireless Headsets
- Telecom and Network Systems
- Gaming
- Wireless Modem Data Cards
- Various applications equipped with buttons
- Set-top-box
- Hot Swaps
- HDD, SSD
- USB Power Distribution
- USB Protection
