banner_page

VN750PTTR-E

8/36V N-Channel PMIC VIPower? Series VN750 5 Pin 13V TO-252-5, DPak (4 Leads + Tab), TO-252AD


  • Manufacturer: STMicroelectronics
  • Nocochips NO: 761-VN750PTTR-E
  • Package: TO-252-5, DPak (4 Leads + Tab), TO-252AD
  • Datasheet: PDF
  • Stock: 865
  • Description: 8/36V N-Channel PMIC VIPower? Series VN750 5 Pin 13V TO-252-5, DPak (4 Leads + Tab), TO-252AD (Kg)

Details

Tags

Parameters
Fault Protection Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage
Number of Drivers 1
Output Peak Current Limit-Nom 9A
Rds On (Typ) 60m Ω (Max)
Built-in Protections TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE
On-State Resistance 60mOhm
Height 2.63mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 7 months ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case TO-252-5, DPak (4 Leads + Tab), TO-252AD
Number of Pins 5
Manufacturer Package Identifier PPAK-GAPGRI00178
Operating Temperature -40°C~150°C TJ
Packaging Tape & Reel (TR)
Series VIPower™
JESD-609 Code e3
Feature Auto Restart, Status Flag
Part Status Active
Moisture Sensitivity Level (MSL) 3 (168 Hours)
Number of Terminations 5
ECCN Code EAR99
Resistance 60mOhm
Terminal Finish Matte Tin (Sn) - annealed
Subcategory Peripheral Drivers
Max Power Dissipation 60W
Terminal Position SINGLE
Terminal Form GULL WING
Number of Functions 1
Supply Voltage 13V
Base Part Number VN750
Pin Count 5
Output Type N-Channel
Max Output Current 6A
Operating Supply Voltage 13V
Supply Voltage-Max (Vsup) 36V
Power Supplies 8/36V
Interface On/Off
Nominal Supply Current 3.5mA
Output Configuration High Side
Power Dissipation 60W
Output Current 6A
Voltage - Supply (Vcc/Vdd) Not Required
Max Supply Current 3.5mA
Input Type Non-Inverting
Turn On Delay Time 40 μs
Switch Type General Purpose
Output Current per Channel 6A
Turn-Off Delay Time 30 μs
Ratio - Input:Output 1:1
Voltage - Load 5.5V~36V

VN750PTTR-E Overview


Tape & Reel (TR) is the way it's packaged.It is included in the package TO-252-5, DPak (4 Leads + Tab), TO-252AD.The lighting driver is mounted in the Surface Mount position.This switch is of type General Purpose.Keeping the temperature at -40°C~150°C TJ ensures reliable operation.A supply voltage of Not Required is required for it to operate.A maximum voltage of N-Channel volts is available from the output of this LED driver.This LED driving board is equipped with Auto Restart, Status Flag features in order for it to be useful.As you can see, it comes from the VN750 family.A total of 5 terminations have been found in it.5 pins are used for operation.Currently, there are 1 functions associated with the lighting driver.It is necessary to reduce the maximum output current to 6A to meet the operation criteria.With a supply voltage of 13V, high efficiency is possible.This lighting driver is mounted in the way of Surface Mount.There are 5 pins in total on this board.It has 60mOhm resistance.A component of this type is included in the VIPower? series.The output current is set to 6A in this case.A container with a capacity of Peripheral Drivers contains this self-contained lighting driver.The maximum supply voltage for this lighting driver is set to 36V (Vsup).A 8/36V power supply is used by the part.A supply voltage of 13V is recommended for maximum efficiency.There is a maximum current requirement of 3.5mA for its operation.A total of 1 drivers are included in this part.

VN750PTTR-E Features


Supplied from 13V
Resistance of 60mOhm

VN750PTTR-E Applications


There are a lot of STMicroelectronics VN750PTTR-E Power Switches ICs applications.

  • USB Power Distribution
  • Smartphone and PDA
  • Portable GPS
  • Telecom and Network Systems
  • HDD, SSD
  • Notebook PC
  • USB Ports/Hubs
  • Low Voltage I/O System Power
  • Hot Swap
  • Solid-State Drives

Write a review

Note: HTML is not translated!
    Bad           Good