VN750S-E
| Parameters | |
|---|---|
| Input Type | Non-Inverting |
| Turn On Delay Time | 40 μs |
| Switch Type | General Purpose |
| Turn-Off Delay Time | 30 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5.5V~36V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Output Peak Current Limit-Nom | 9A |
| Rds On (Typ) | 60m Ω (Max) |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Series | VIPower™ |
| JESD-609 Code | e4 |
| Feature | Auto Restart, Status Flag |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 4.2W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 13V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | VN750 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 6A |
| Operating Supply Voltage | 13V |
| Supply Voltage-Max (Vsup) | 36V |
| Interface | On/Off |
| Nominal Supply Current | 3.5mA |
| Output Configuration | High Side |
| Power Dissipation | 4.2W |
| Output Current | 6A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 3.5mA |
VN750S-E Overview
It is packaged in the form of a Tube.The 8-SOIC (0.154, 3.90mm Width) package includes it.The LED driver is mounted as Surface Mount.There is a General Purpose switch type associated with it.The temperature should be set to -40°C~150°C TJ to ensure reliable functioning.There is a default setting of 1 for output.To operate, it needs a supply voltage of Not Required.A maximum output voltage of N-Channel volts can be achieved by this LED driver.Auto Restart, Status Flag features are available on the lighting driver.It is a member of the VN750 family.It contains 8 terminations.It is necessary to use the 8 pins in order to operate the LED driver.Currently, the lighting driver has a total of 1 functions.This results in the maximum output current dropping to 6A to meet the operation criteria.A supply voltage of 13V leads to high efficiency.Surface Mount is mounted in the way of this lighting driver.The LED driver has a total of 8 pins.This electrical component can be found in the VIPower? series.As a result, the output current is set to 6A.A self-contained econtainer holding Peripheral Drivers capacity contains this lighting driver.Vsup (maximum supply voltage) is set to 36V.It is recommended that the supply voltage be set at 13V in order to achieve maximum efficiency.This system has a maximum current requirement of 3.5mA.
VN750S-E Features
Supplied from 13V
VN750S-E Applications
There are a lot of STMicroelectronics VN750S-E Power Switches ICs applications.
- Notebook PC
- Portable Devices
- USB3.1 Power Delivery
- HDD and SSD
- Various applications equipped with buttons
- PC Cards
- Mobile Communication Devices
- Hard Disk Drives
- PDAs
- PC Card Hot Swap
