VN750SM
| Parameters | |
|---|---|
| Length | 4.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Series | VIPower™ |
| JESD-609 Code | e0 |
| Feature | Auto Restart, Status Flag |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 55mOhm |
| Terminal Finish | TIN LEAD |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 4.2W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 13V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | VN750 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Max Output Current | 6A |
| Operating Supply Voltage | 36V |
| Interface | On/Off |
| Nominal Supply Current | 2mA |
| Output Configuration | High Side |
| Power Dissipation | 4.2W |
| Output Current | 6A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 25mA |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 5.5V |
| Max Input Voltage | 36V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5.5V~36V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Output Peak Current Limit-Nom | 10A |
| Rds On (Typ) | 55m Ω (Max) |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
VN750SM Overview
It is packaged in the form of a Tube.It is included in the package 8-SOIC (0.154, 3.90mm Width).This LED driving board is mounted using the mounting type Surface Mount.This switch is of type General Purpose.It is recommended that the temperature be set to -40°C~150°C TJ for reliable operation.By default, it is set to output 1.In order to operate, it requires a voltage supply of Not Required.It produces a maximum output voltage of N-Channel volts at its maximum output.It has a total of Auto Restart, Status Flag features.It comes under the family of VN750.A total of 8 terminations can be found in it.The operation is performed through the 8 pins.Currently, there are 1 functions associated with the lighting driver.This operation requires the maximum output current to be decreased to 6A.High efficiency is possible at 13V supply voltage.As a result, it is mounted in the manner of Surface Mount.A total of 8 pins are present on it.55mOhm is the resistance of the lighting driver.The VIPower? series includes this electrical component.The output current is set to 6A in this case.Self-contained in an econtainer with a capacity of Peripheral Drivers, this LED driver is self-contained.In order to achieve the best efficiency, the supply voltage should be set to 36V.Its maximum input voltage is 36V volts.A minimum input voltage of 5.5V volts is required for this LED driver.This system has a maximum current requirement of 25mA.
VN750SM Features
Supplied from 13V
Resistance of 55mOhm
VN750SM Applications
There are a lot of STMicroelectronics VN750SM Power Switches ICs applications.
- USB Power Distribution
- Hard Disk Drives
- Smartphone and PDA
- Smart Phones, Feature Phones
- PC Card Hot Swap
- Portable GPS Device
- Hot Swap
- Notebook PC
- HDD, SSD
- Set-Top Boxes
