VN750SMPTR-E
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | VIPower™ |
| JESD-609 Code | e3 |
| Feature | Auto Restart, Status Flag |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 55mOhm |
| Terminal Finish | Tin (Sn) |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 4.2W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Supply Voltage | 13V |
| Base Part Number | VN750 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 6A |
| Supply Voltage-Max (Vsup) | 36V |
| Supply Voltage-Min (Vsup) | 5.5V |
| Interface | On/Off |
| Element Configuration | Single |
| Nominal Supply Current | 10μA |
| Output Configuration | High Side |
| Power Dissipation | 4.2W |
| Output Current | 6A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 20μA |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Output Current per Channel | 6A |
| Rise Time | 40μs |
| Fall Time (Typ) | 30 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5.5V~36V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Output Peak Current Limit-Nom | 10A |
| Rds On (Typ) | 55m Ω (Max) |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
VN750SMPTR-E Overview
The package is in the form of a Tape & Reel (TR).In the 8-SOIC (0.154, 3.90mm Width) package, it is included.This lighting drivere has a mounting type of Surface Mount.The switch type is General Purpose.It is recommended that the temperature be set to -40°C~150°C TJ for reliable performance.As a default, the output is set to 1.A voltage of Not Required is used to power it.There is a maximum output voltage of N-Channel volts.As far as features are concerned, the LED driving board has Auto Restart, Status Flag.It is a member of the VN750 family.In total, there are 8 terminations.8 pins are used for operation.It is important to note that the LED driving board has 1 functions.It is necessary to reduce the maximum output current to 6A to meet the operation criteria.High efficiency is possible at 13V supply voltage.It is mounted in the way of Surface Mount.The LED driver has a total of 8 pins.The LED driver has 55mOhm resistance.This electrical component can be found in the VIPower? series.This case results in a 6A output current.There is a Peripheral Drivers capacity container for this LED driver that is self-contained.Vsup (maximum supply voltage) is set to 36V.Normal operation requires a voltage above 5.5V for the supply voltage.For its operation, a current of 20μA is required.
VN750SMPTR-E Features
Supplied from 13V
Resistance of 55mOhm
VN750SMPTR-E Applications
There are a lot of STMicroelectronics VN750SMPTR-E Power Switches ICs applications.
- Hot-Swap Systems
- Portable/Handheld Devices
- Hot Swap
- Set-top-box
- Portable GPS Device
- Portable Video Game Players
- Notebook and Tablet Computers
- Storage (HDDs, SSDs)
- Smartphone and PDA
- Set-Top Boxes
