VN750SMTR-E
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | VIPower™ |
| JESD-609 Code | e4 |
| Feature | Auto Restart, Status Flag |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 55mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 4.2W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 13V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | VN750 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Operating Supply Voltage | 13V |
| Supply Voltage-Max (Vsup) | 36V |
| Interface | On/Off |
| Nominal Supply Current | 2mA |
| Output Configuration | High Side |
| Power Dissipation | 4.2W |
| Output Current | 6A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Output Current per Channel | 6A |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5.5V~36V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Output Peak Current Limit-Nom | 10A |
| Rds On (Typ) | 55m Ω (Max) |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Length | 4.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
VN750SMTR-E Overview
As you can see, it's packaged in the way of a Tape & Reel (TR).In the 8-SOIC (0.154, 3.90mm Width) package, it is included.In this case, the LED driving board is mounted as Surface Mount.It owns the General Purpose switch type.Ensure reliable operation by setting the temperature to -40°C~150°C TJ.There are 1 outputs available on this lighting driver.The LED driving board is powered by a voltage of Not Required.A maximum output voltage of N-Channel volts can be obtained with this LED driver.As far as features are concerned, the LED driving board has Auto Restart, Status Flag.The VN750 family consists of this type.A total of 8 terminations have been found in it.The 8 pins are used to operate the LED driver.It contains 1 functions.High efficiency is possible when the supply voltage is set to 13V.It is mounted in the way of Surface Mount.In total, it has 8 pins.It has a resistance of 55mOhm.This electrical component is included in the VIPower? series.As a result, the output current is set to 6A.It is self-contained in an econtainer with a capacity of Peripheral Drivers.The maximum supply voltage for this LED driver is 36V (Vsup).A supply voltage of 13V is recommended for maximum efficiency.
VN750SMTR-E Features
Supplied from 13V
Resistance of 55mOhm
VN750SMTR-E Applications
There are a lot of STMicroelectronics VN750SMTR-E Power Switches ICs applications.
- Hot Swaps
- Portable Music Players
- Portable GPS
- Wireless Modem Data Cards
- Portable Video Game Players
- PC Cards
- USB Protection
- Gaming
- Set-top-box
- USB Power Distribution
