VN750STR-E
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | VIPower™ |
| JESD-609 Code | e4 |
| Feature | Auto Restart, Status Flag |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 4.2W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 13V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | VN750 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 6A |
| Operating Supply Voltage | 13V |
| Supply Voltage-Max (Vsup) | 36V |
| Interface | On/Off |
| Nominal Supply Current | 3.5mA |
| Output Configuration | High Side |
| Power Dissipation | 4.2W |
| Output Current | 6A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 3.5mA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 40 μs |
| Switch Type | General Purpose |
| Turn-Off Delay Time | 30 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5.5V~36V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Output Peak Current Limit-Nom | 9A |
| Rds On (Typ) | 60m Ω (Max) |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
VN750STR-E Overview
As you can see, it's packaged in the way of a Tape & Reel (TR).It is included with the 8-SOIC (0.154, 3.90mm Width) package as well.In this case, the LED driving board is mounted as Surface Mount.The switch type of this switch is General Purpose.It is best to set the temperature to -40°C~150°C TJ to ensure reliable operation.There is a default setting of 1 for output.It uses a supply voltage of Not Required to operate.There is a maximum output voltage of N-Channel volts on this LED driver.As far as features are concerned, the LED driving board has Auto Restart, Status Flag.It is a member of the VN750 family.It consists of 8 terminations in total.It is necessary to use the 8 pins in order to operate the LED driver.It has 1 functions.The maximum output current must drop to 6A to meet the operation criteria.Supply voltages of 13V allow for high efficiency.This lighting driver is mounted in the way of Surface Mount.There are 8 pins in total on this board.This electrical component is included in the VIPower? series.When this case is used, the output current is set to 6A.It is self-contained in an econtainer with a capacity of Peripheral Drivers.A maximum supply voltage of 36V is set in Vsup.It is recommended that the supply voltage be set at 13V in order to achieve maximum efficiency.For its operation, a maximum current requirement of 3.5mA is required.
VN750STR-E Features
Supplied from 13V
VN750STR-E Applications
There are a lot of STMicroelectronics VN750STR-E Power Switches ICs applications.
- HDD, SSD
- Portable Music Players
- HDD and SSD
- Wireless Headsets
- Portable/Handheld Devices
- Smartphone and PDA
- Portable Video Game Players
- Gaming
- Mobile Communication Devices
- PDAs
