VN751PT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 8 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-252-5, DPak (4 Leads + Tab), TO-252AD |
| Number of Pins | 5 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Series | VIPower™ |
| JESD-609 Code | e3 |
| Feature | Auto Restart, Status Flag |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Resistance | 60mOhm |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Peripheral Drivers |
| Terminal Position | SINGLE |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 13V |
| Base Part Number | VN751 |
| Pin Count | 5 |
| Output Type | N-Channel |
| Max Output Current | 2.5A |
| Supply Voltage-Max (Vsup) | 36V |
| Power Supplies | 8/36V |
| Interface | On/Off |
| Nominal Supply Current | 1.8mA |
| Output Configuration | High Side |
| Output Current | 2.5A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 1.8mA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 12 μs |
| Switch Type | General Purpose |
| Output Current per Channel | 2.5A |
| Turn-Off Delay Time | 35 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5.5V~36V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Number of Drivers | 1 |
| Output Peak Current Limit-Nom | 2.5A |
| Rds On (Typ) | 60m Ω |
| Built-in Protections | TRANSIENT |
| Height | 2.4mm |
| Length | 6.6mm |
| Width | 6.2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
VN751PT Overview
It is packaged in the manner of a Tube.It is included with the TO-252-5, DPak (4 Leads + Tab), TO-252AD package as well.The mounting type of the LED driver is Surface Mount.General Purpose is the type of switch owned by it.To ensure reliable performance, the temperature should be set to -40°C~150°C TJ.Operation is based on Not Required supply voltage.A maximum output voltage of N-Channel volts can be achieved by this LED driver.This LED driving board is equipped with Auto Restart, Status Flag features in order for it to be useful.It belongs to the VN751 family.A total of 5 terminations can be found in it.The 5 pins are used to operate the LED driver.Currently, there are 1 functions associated with the lighting driver.To comply with the operation criteria, the maximum output current is reduced to 2.5A.High efficiency is possible when the supply voltage is set to 13V.Surface Mount is mounted in the way of this LED driving board.The LED driver has a total of 5 pins.There is 60mOhm resistance on the LED driver.The VIPower? series includes this electrical component.As a result, the output current is set to 2.5A.Self-contained LED driver with Peripheral Drivers capacity in an econtainer.In this LED driver, the maximum supply voltage is configured to be 36V (Vsup).A 8/36V power supply is used by the part.It operates at a maximum current of 1.8mA.It has 1 drivers.
VN751PT Features
Supplied from 13V
Resistance of 60mOhm
VN751PT Applications
There are a lot of STMicroelectronics VN751PT Power Switches ICs applications.
- USB Power Distribution
- HDD, SSD
- USB Ports/Hubs
- Wireless/Networking Cards
- Handheld Devices
- Wearable Devices
- Notebook PC
- Mobile Communication Devices
- Portable Music Players
- Gaming
