Parameters |
Number of Functions |
1 |
Supply Voltage |
13V |
Base Part Number |
VN751 |
Pin Count |
5 |
JESD-30 Code |
R-PSSO-G5 |
Output Type |
N-Channel |
Max Output Current |
2.5A |
Operating Supply Voltage |
24V |
Voltage |
36V |
Interface |
On/Off |
Nominal Supply Current |
1.5mA |
Current |
2.5A |
Output Configuration |
High Side |
Output Current |
2.5A |
Voltage - Supply (Vcc/Vdd) |
Not Required |
Max Supply Current |
1.8mA |
Input Type |
Non-Inverting |
Turn On Delay Time |
12 μs |
Switch Type |
General Purpose |
Turn-Off Delay Time |
35 μs |
Ratio - Input:Output |
1:1 |
Voltage - Load |
5.5V~36V |
Fault Protection |
Current Limiting (Fixed), Over Temperature, Over Voltage |
Number of Drivers |
1 |
Output Peak Current Limit-Nom |
2.5A |
Rds On (Typ) |
60m Ω |
Built-in Protections |
TRANSIENT |
Height |
2.4mm |
Length |
6.6mm |
Width |
6.2mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 7 months ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
TO-252-5, DPak (4 Leads + Tab), TO-252AD |
Number of Pins |
4 |
Operating Temperature |
-40°C~150°C TJ |
Packaging |
Tape & Reel (TR) |
Series |
VIPower™ |
JESD-609 Code |
e3 |
Feature |
Auto Restart, Status Flag |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
Number of Terminations |
5 |
ECCN Code |
EAR99 |
Terminal Finish |
Matte Tin (Sn) - annealed |
Subcategory |
Peripheral Drivers |
Terminal Position |
SINGLE |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
VN751PT13TR Overview
A Tape & Reel (TR) is used to package it.This package is included in TO-252-5, DPak (4 Leads + Tab), TO-252AD.A Surface Mount mounting is used for the LED driving board.A General Purpose switch type is owned by it.To ensure reliable operation, the temperature should be set to -40°C~150°C TJ.With a supply voltage of Not Required, the LED driving board operates.It produces a maximum output voltage of N-Channel volts at its maximum output.In terms of features, the LED driving board has Auto Restart, Status Flag.The VN751 family contains this object.The termination count is 5.4 pins are used for operation.It has 1 functions.This results in the maximum output current dropping to 2.5A to meet the operation criteria.A supply voltage of 13V leads to high efficiency.Surface Mount is mounted in the way.It is equipped with a total of 5 pins.A component of this type is included in the VIPower? series.This case results in a 2.5A output current.A self-contained econtainer holding Peripheral Drivers capacity contains this lighting driver.When using this LED driving board, it is recommended that the supply voltage is set to 24V.1.8mA is the maximum current required to operate it.There are 1 drivers associated with this part.
VN751PT13TR Features
Supplied from 13V
VN751PT13TR Applications
There are a lot of STMicroelectronics VN751PT13TR Power Switches ICs applications.
- Low Voltage I/O System Power
- Set-top-box
- HDD, SSD
- Solid-State Drives
- Portable Video Game Players
- PC Cards
- Solid State Drivers
- Portable Music Players
- Wireless Headsets
- Handheld Devices