VN751S
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 8 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Feature | Auto Restart, Status Flag |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 60mOhm |
| Subcategory | Peripheral Drivers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 24V |
| Base Part Number | VN751 |
| Pin Count | 8 |
| Output Type | N-Channel |
| Max Output Current | 2.5A |
| Operating Supply Voltage | 13V |
| Interface | On/Off |
| Nominal Supply Current | 1.5mA |
| Output Configuration | High Side |
| Output Current | 2.5A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 1.8mA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 12 μs |
| Switch Type | General Purpose |
| Output Current per Channel | 2.5A |
| Nominal Input Voltage | 36V |
| Turn-Off Delay Time | 35 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5.5V~36V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Number of Drivers | 1 |
| Output Peak Current Limit-Nom | 2.7A |
| Rds On (Typ) | 60m Ω |
| Built-in Protections | TRANSIENT |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
VN751S Overview
It is packaged in the manner of a Tube.This package is included in 8-SOIC (0.154, 3.90mm Width).The mounting type of the LED driver is Surface Mount.General Purpose is the switch type it owns.Ensure reliable operation by setting the temperature to -40°C~150°C TJ.To operate, it needs a supply voltage of Not Required.The maximum output voltage of this LED driver is N-Channel volts.It is equipped with Auto Restart, Status Flag features.It comes under the family of VN751.It consists of 8 terminations in total.8 pins are used for operation.Currently, the lighting driver has a total of 1 functions.The maximum output current drops to 2.5A in order to meet the operation criteria.It is possible to obtain high efficiency with a supply voltage of 24V.It is positioned in the direction of Surface Mount.A total of 8 pins are present on it.In this LED driving board, there is 60mOhm resistance.The output current is set to 2.5A in this case.It is self-contained in an econtainer with a capacity of Peripheral Drivers.For maximum efficiency, the supply voltage should be set to 13V.It requires a maximum current requirement of 1.8mA.There are 1 drivers available for this part.
VN751S Features
Supplied from 24V
Resistance of 60mOhm
VN751S Applications
There are a lot of STMicroelectronics VN751S Power Switches ICs applications.
- Portable Devices
- PC Card Hot Swap
- USB Power Distribution
- Hot Swaps
- Smart Phones, Feature Phones
- Hot Swap
- Storage (HDDs, SSDs)
- USB Power Distribution
- Low Voltage I/O System Power
- Portable Video Game Players
