VN751STR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Feature | Auto Restart, Status Flag |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Peripheral Drivers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 24V |
| Base Part Number | VN751 |
| Pin Count | 8 |
| Output Type | N-Channel |
| Max Output Current | 2.5A |
| Operating Supply Voltage | 24V |
| Voltage | 36V |
| Interface | On/Off |
| Nominal Supply Current | 1.8mA |
| Current | 2.5A |
| Output Configuration | High Side |
| Output Current | 2.5A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 1.8mA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 12 μs |
| Switch Type | General Purpose |
| Turn-Off Delay Time | 35 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5.5V~36V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Number of Drivers | 1 |
| Output Peak Current Limit-Nom | 2.7A |
| Rds On (Typ) | 60m Ω |
| Built-in Protections | TRANSIENT |
| Height | 1.65mm |
| Length | 5mm |
| Width | 4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
VN751STR Overview
As a result, it is packaged in the form of a Tape & Reel (TR).It is included with the 8-SOIC (0.154, 3.90mm Width) package as well.The mounting type of the LED driver is Surface Mount.It owns the General Purpose switch type.To ensure reliable operation, set the temperature to -40°C~150°C TJ.Operation is based on a supply voltage of Not Required.A maximum output voltage of N-Channel volts has been specified.Currently, the LED driving board is equipped with Auto Restart, Status Flag features.As you can see, it comes from the VN751 family.As a result, there are 8 terminations.In order to operate, the 8 pins are used.It contains 1 functions.As a result, the maximum output current is reduced to 2.5A in order to meet the operation requirements.High efficiency is possible when the supply voltage is set to 24V.The lighting driver is mounted in the way of Surface Mount.There are 8 pins in total on this board.This case has the output current set to 2.5A.This LED driver is self-contained in an econtainer with a capacity of Peripheral Drivers.In order to optimize the efficiency of the supply voltage, it should be set to 24V.This system has a maximum current requirement of 1.8mA.It has 1 drivers in the part.
VN751STR Features
Supplied from 24V
VN751STR Applications
There are a lot of STMicroelectronics VN751STR Power Switches ICs applications.
- Smart Phones, Feature Phones
- Portable/Handheld Devices
- Hot Swap
- USB Protection
- Solid-State Drives
- Various applications equipped with buttons
- Portable GPS
- PDAs
- Wireless Headsets
- PC Cards
