VN770K
| Parameters | |
|---|---|
| Number of Functions | 1 |
| Supply Voltage | 13V |
| Terminal Pitch | 1.27mm |
| Base Part Number | VN770 |
| Pin Count | 28 |
| Operating Supply Voltage | 13V |
| Supply Voltage-Max (Vsup) | 36V |
| Power Supplies | 8/36V |
| Supply Voltage-Min (Vsup) | 5.5V |
| Interface | Logic |
| Analog IC - Other Type | BRUSH DC MOTOR CONTROLLER |
| Nominal Supply Current | 25mA |
| Output Configuration | Half Bridge (2) |
| Output Current-Max | 12A |
| Output Current per Channel | 9A |
| Rise Time | 14μs |
| Supply Current-Max (Isup) | 7mA |
| Fall Time (Typ) | 11 μs |
| Voltage - Load | 40V Max |
| Fault Protection | Current Limiting, ESD, Open Load Detect, Over Temperature, Over Voltage, Short Circuit, UVLO |
| Number of Drivers | 4 |
| Rds On (Typ) | 160m Ω (Max) |
| Load Type | Inductive |
| Height Seated (Max) | 2.65mm |
| Length | 17.9mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Series | OMNIFET II™, VIPower™ |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Resistance | 160mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | DC Motors, General Purpose, Relays |
| Subcategory | Motion Control Electronics |
| Max Power Dissipation | 6W |
| Technology | Power MOSFET |
| Voltage - Supply | 5.5V~36V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
VN770K Overview
H bridge is packaged using Tube.In order to save costs, H bridge is included in the 28-SOIC (0.295, 7.50mm Width) package.With the 5.5V~36V supply voltage, improved reliabilbridge drivery can be achieved.In the way of Surface Mount, H bridge circuit is mounted.-40°C~150°C TJ is able to function normally at motor driver H bridges operating temperature.A number of applications can be made use of H bridge motor driver, including DC Motors, General Purpose, Relays.PCB mounting is performed using Surface Mount.In addH gateion to Status Flag, H gate has the following specific characteristics.A transmission line is terminated with a H bridge that matches its characteristic impedance, referred to as a 28 termination.In a signal interface, the 28 pins serve as pronged contacts.This H bridge ic has a base H bridge ic number of VN770 which allows more related H bridge ics to be identified.The H bridge operates at a voltage of 13V.IC type BRUSH DC MOTOR CONTROLLER is used as H bridge circuit's analog IC.It is a kind of electronic H-bridge belonging to the OMNIFET II?, VIPower? series.This bridge driver functions in part thanks to the 28 pins working together.H bridge motor drivers in the subcategory Motion Control Electronics have a wide range of similarities.The operating supply voltage is maintained at 13V in order to ensure high efficiency.A load of electricity is supplied by 8/36V.There are integrated 4 drivers in the system.
VN770K Features
Available in 28-SOIC (0.295, 7.50mm Width) Package / Case
Operating Temperature at the range of Surface Mount
Interface IC Type : VN770
Number of Receivers: 13V
VN770K Applications
There are a lot of STMicroelectronics VN770K Full Bridge Drivers, Half-Bridge Drivers applications.
- Notebook Computers
- Voltage Regulators for CPUs
- Home Appliances
- Quad DC motor
- V-Core
- Optical disc drives
- Telecom Microprocessor
- High current, low profile DC-DC converters
- VTR
- Bipolar stepper motor
