VN800PS-E
| Parameters | |
|---|---|
| Switch Type | General Purpose |
| Min Input Voltage | 5.5V |
| Max Input Voltage | 36V |
| Output Current per Channel | 700mA |
| Nominal Input Voltage | 36V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5.5V~36V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Rds On (Typ) | 135m Ω (Max) |
| Built-in Protections | TRANSIENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Length | 4.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lifecycle Status | NRND (Last Updated: 8 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Series | VIPower™ |
| JESD-609 Code | e3 |
| Feature | Auto Restart, Status Flag |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 135mOhm |
| Terminal Finish | Tin (Sn) |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 4.2W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 24V |
| Base Part Number | VN800 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 2A |
| Operating Supply Voltage | 36V |
| Interface | On/Off |
| Nominal Supply Current | 1.5mA |
| Output Configuration | High Side |
| Power Dissipation | 4.2W |
| Output Current | 700mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
VN800PS-E Overview
The LED driver's packaged as a Tube.It is included with the 8-SOIC (0.154, 3.90mm Width) package as well.Mounting type Surface Mount is selected for the LED driving board.General Purpose is the type of switch owned by it.Keeping the temperature at -40°C~150°C TJ ensures reliable operation.In this LED driver, there are no outputs available.A supply voltage of Not Required is required for it to operate.A maximum output voltage of N-Channel volts can be achieved by this LED driver.It is equipped with Auto Restart, Status Flag features.It is part of the VN800 family of LED drivers.It consists of 8 terminations in total.The 8 pins are used for the operation of the system.Currently, there are 1 functions associated with the lighting driver.It is necessary to reduce the maximum output current to 2A to meet the operation criteria.As long as the supply voltage is 24V, high efficiency can be achieved.It is mounted in the way of Surface Mount.In this LED driving board, there is 135mOhm resistance.A component of this type is included in the VIPower? series.It is set to 700mA in this case.Self-contained in an econtainer with a capacity of Peripheral Drivers, this LED driver is self-contained.When using this LED driving board, it is recommended that the supply voltage is set to 36V.It has a maximum input voltage of 36V volts.Input voltage must be at least 5.5V volts.
VN800PS-E Features
Supplied from 24V
Resistance of 135mOhm
VN800PS-E Applications
There are a lot of STMicroelectronics VN800PS-E Power Switches ICs applications.
- Storage (HDDs, SSDs)
- PC Card Hot Swap
- Set-top-box
- Hot Swap
- Hot Swap
- Solid State Drivers
- USB Power Distribution
- Gaming
- Low Voltage I/O System Power
- Various applications equipped with buttons
