Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 6 months ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
8-SOIC (0.154, 3.90mm Width) |
Number of Pins |
8 |
Operating Temperature |
-40°C~150°C TJ |
Packaging |
Tape & Reel (TR) |
Series |
VIPower™ |
JESD-609 Code |
e3 |
Feature |
Auto Restart, Status Flag |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Resistance |
135mOhm |
Terminal Finish |
Tin (Sn) |
Subcategory |
Peripheral Drivers |
Max Power Dissipation |
4.2W |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
245 |
Number of Functions |
1 |
Supply Voltage |
24V |
Time@Peak Reflow Temperature-Max (s) |
40 |
Base Part Number |
VN800 |
Output Type |
N-Channel |
Max Output Current |
2A |
Interface |
On/Off |
Nominal Supply Current |
1.5mA |
Output Configuration |
High Side |
Power Dissipation |
4.2W |
Output Current |
700mA |
Voltage - Supply (Vcc/Vdd) |
Not Required |
Max Supply Current |
2.6mA |
Input Type |
Non-Inverting |
Turn On Delay Time |
10 μs |
Switch Type |
General Purpose |
Min Input Voltage |
5.5V |
Max Input Voltage |
36V |
Output Current per Channel |
700mA |
Turn-Off Delay Time |
40 μs |
Ratio - Input:Output |
1:1 |
Voltage - Load |
5.5V~36V |
Fault Protection |
Current Limiting (Fixed), Over Temperature, Over Voltage |
Number of Drivers |
1 |
Rds On (Typ) |
135m Ω (Max) |
Built-in Protections |
TRANSIENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
Height |
1.65mm |
Length |
5mm |
Width |
6.2mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
VN800PSTR-E Overview
As a result, it is packaged in the form of a Tape & Reel (TR).The 8-SOIC (0.154, 3.90mm Width) package contains it.This lighting drivere has a mounting type of Surface Mount.General Purpose is the switch type that it owns.It is recommended that the temperature be set to -40°C~150°C TJ for reliable operation.The LED driving board operates at Not Required volts.There is a maximum output voltage of N-Channel volts.It has a total of Auto Restart, Status Flag features.The VN800 family consists of this type.It contains 8 terminations.The operation is carried out using the 8 pins.As far as the lighting driver is concerned, there are 1 functions.The maximum output current is reduced to 2A to meet the operation criteria.As long as the supply voltage is 24V, high efficiency can be achieved.As a result, it is mounted in the manner of Surface Mount.Currently, the LED driving board has a resistance of 135mOhm ohms.This electrical component is included in the VIPower? series.This case has the output current set to 700mA.Self-contained LED driver with Peripheral Drivers capacity in an econtainer.It has a maximum input voltage of 36V volts.The minimum input voltage is 5.5V volts.It requires a maximum current requirement of 2.6mA.A total of 1 drivers are included in this part.
VN800PSTR-E Features
Supplied from 24V
Resistance of 135mOhm
VN800PSTR-E Applications
There are a lot of STMicroelectronics VN800PSTR-E Power Switches ICs applications.
- USB Protection
- Hot Swap
- Smartphone and PDA
- Set-Top Boxes
- Hot Swaps
- Portable/Handheld Devices
- Solid-State Drives
- Portable GPS Device
- Smart Phones, Feature Phones
- Storage (HDDs, SSDs)