banner_page

VN800PT

8/36V N-Channel PMIC VIPower? Series VN800 5 Pin 24V TO-252-5, DPak (4 Leads + Tab), TO-252AD


  • Manufacturer: STMicroelectronics
  • Nocochips NO: 761-VN800PT
  • Package: TO-252-5, DPak (4 Leads + Tab), TO-252AD
  • Datasheet: PDF
  • Stock: 705
  • Description: 8/36V N-Channel PMIC VIPower? Series VN800 5 Pin 24V TO-252-5, DPak (4 Leads + Tab), TO-252AD (Kg)

Details

Tags

Parameters
Mount Surface Mount
Mounting Type Surface Mount
Package / Case TO-252-5, DPak (4 Leads + Tab), TO-252AD
Number of Pins 5
Operating Temperature -40°C~150°C TJ
Packaging Tube
Series VIPower™
JESD-609 Code e0
Feature Auto Restart, Status Flag
Pbfree Code no
Part Status Obsolete
Moisture Sensitivity Level (MSL) 3 (168 Hours)
Number of Terminations 4
ECCN Code EAR99
Terminal Finish Tin/Lead (Sn/Pb)
Subcategory Peripheral Drivers
Max Power Dissipation 41.7W
Terminal Position SINGLE
Terminal Form GULL WING
Number of Functions 1
Supply Voltage 24V
Base Part Number VN800
Pin Count 4
JESD-30 Code R-PSSO-G4
Number of Outputs 1
Output Type N-Channel
Max Output Current 700mA
Operating Supply Voltage 41V
Supply Voltage-Max (Vsup) 36V
Power Supplies 8/36V
Interface On/Off
Nominal Supply Current 2mA
Output Configuration High Side
Power Dissipation 41.7W
Output Current 700mA
Voltage - Supply (Vcc/Vdd) Not Required
Input Type Non-Inverting
Switch Type General Purpose
Ratio - Input:Output 1:1
Voltage - Load 5.5V~36V
Driver Number of Bits 1
Fault Protection Current Limiting (Fixed), Over Temperature, Over Voltage
Output Peak Current Limit-Nom 0.7A
Rds On (Typ) 135m Ω (Max)
Drain to Source Resistance 270mOhm
Built-in Protections TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE
Height Seated (Max) 2.63mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Contains Lead

VN800PT Overview


It's?packaged?in?the way?of?a?Tube.The TO-252-5, DPak (4 Leads + Tab), TO-252AD package contains it.The mounting type of the LED driver is Surface Mount.It owns General Purpose switch type.In order to guarantee reliable performance, the temperature should be set to -40°C~150°C TJ.The LED driver has 1 outputs.It uses a supply voltage of Not Required to operate.There is a maximum output voltage of N-Channel volts.As far as features are concerned, the LED driving board has Auto Restart, Status Flag.It belongs to the family VN800.A total of 4 terminations have been recorded.The 5 pins are used to operate the LED driver.It contains 1 functions.As a result, the maximum output current is reduced to 700mA in order to meet the operation requirements.High efficiency is possible at 24V supply voltage.Surface Mount is mounted in the way of this LED driving board.4 pins are equipped with it.These electrical components are part of the VIPower? series.This case results in a 700mA output current.This LED driver is self-contained in an econtainer with a capacity of Peripheral Drivers.The lighting driver is configured to have a maximum supply voltage of 36V (Vsup).There is a voltage supply of 8/36V volts on this part.In order to optimize the efficiency of the supply voltage, it should be set to 41V.

VN800PT Features


Supplied from 24V

VN800PT Applications


There are a lot of STMicroelectronics VN800PT Power Switches ICs applications.

  • Solid State Drivers
  • Portable Music Players
  • PC Cards
  • Set-top-box
  • Wireless Headsets
  • Smart Phones, Feature Phones
  • Solid-State Drives
  • Hard Disk Drives
  • Set-Top Boxes
  • Hot Swap

Write a review

Note: HTML is not translated!
    Bad           Good