VN800PT-E
| Parameters | |
|---|---|
| JESD-30 Code | R-PSSO-G4 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 2A |
| Interface | On/Off |
| Nominal Supply Current | 1.5mA |
| Output Configuration | High Side |
| Power Dissipation | 41.7W |
| Output Current | 700mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Output Current per Channel | 700mA |
| Nominal Input Voltage | 36V |
| Collector Emitter Voltage (VCEO) | 36V |
| Max Collector Current | 700mA |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5.5V~36V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Rds On (Typ) | 135m Ω (Max) |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Height | 2.4mm |
| Length | 6.6mm |
| Width | 6.2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 8 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-252-5, DPak (4 Leads + Tab), TO-252AD |
| Number of Pins | 5 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Series | VIPower™ |
| JESD-609 Code | e3 |
| Feature | Auto Restart, Status Flag |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 4 |
| ECCN Code | EAR99 |
| Resistance | 135mOhm |
| Terminal Finish | Tin (Sn) |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 41.7W |
| Terminal Position | SINGLE |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 13V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | VN800 |
| Pin Count | 4 |
VN800PT-E Overview
The LED driver's packaged as a Tube.This file is included in package TO-252-5, DPak (4 Leads + Tab), TO-252AD.Surface Mount is the mounting type of the LED driver.The switch type of this switch is General Purpose.To ensure reliable operation, set the temperature to -40°C~150°C TJ.The lighting driver has a total of 1 outputs that are available for use.A voltage of Not Required is used to power it.A maximum output voltage of N-Channel volts can be obtained with this LED driver.Features of the lighting driver are Auto Restart, Status Flag.It is a member of the VN800 family.A total of 4 terminations have been recorded.5 pins are used for operation.It has 1 functions.To meet the operation criteria, the maximum output current drops to 2A.Supply voltages of 13V allow for high efficiency.The lighting driver is mounted in the direction of Surface Mount.A total of 4 pins are included in this LED driver.In this LED driving board, there is 135mOhm resistance.It is part of the VIPower? series.When this case is used, the output current is set to 700mA.The LED driver is self-contained in an econtainer with Peripheral Drivers capacity.
VN800PT-E Features
Supplied from 13V
Resistance of 135mOhm
VN800PT-E Applications
There are a lot of STMicroelectronics VN800PT-E Power Switches ICs applications.
- Hot Swap
- Portable GPS
- Portable Video Game Players
- Portable/Handheld Devices
- USB Protection
- Storage (HDDs, SSDs)
- Solid State Drivers
- Wireless/Networking Cards
- Wireless Modem Data Cards
- USB Power Distribution
