VN800PT13TR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-252-5, DPak (4 Leads + Tab), TO-252AD |
| Number of Pins | 5 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | VIPower™ |
| JESD-609 Code | e0 |
| Feature | Auto Restart, Status Flag |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 4 |
| ECCN Code | EAR99 |
| Resistance | 135mOhm |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 41.7W |
| Terminal Position | SINGLE |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 24V |
| Base Part Number | VN800 |
| Pin Count | 4 |
| JESD-30 Code | R-PSSO-G4 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 2A |
| Operating Supply Voltage | 41V |
| Supply Voltage-Max (Vsup) | 36V |
| Power Supplies | 8/36V |
| Interface | On/Off |
| Nominal Supply Current | 2mA |
| Output Configuration | High Side |
| Power Dissipation | 41.7W |
| Output Current | 700mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Output Current per Channel | 700mA |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5.5V~36V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Output Peak Current Limit-Nom | 0.7A |
| Rds On (Typ) | 135m Ω (Max) |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Height Seated (Max) | 2.63mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
VN800PT13TR Overview
The package is in the form of a Tape & Reel (TR).The TO-252-5, DPak (4 Leads + Tab), TO-252AD package includes it.This LED driving board is mounted using the mounting type Surface Mount.The switch type is General Purpose.The temperature should be set to -40°C~150°C TJ to ensure reliable functioning.As a default, the output is set to 1.To operate, it needs a supply voltage of Not Required.The maximum output voltage is N-Channel volts.Currently, the LED driving board is equipped with Auto Restart, Status Flag features.The VN800 family consists of this type.As a result, there are 4 terminations.The 5 pins are used to operate the LED driver.The LED driver has 1 functions.This operation requires the maximum output current to be decreased to 2A.As long as the supply voltage is 24V, high efficiency can be achieved.As a result, it is mounted in the manner of Surface Mount.It is equipped with a total of 4 pins.Currently, the LED driving board has a resistance of 135mOhm ohms.There is an electrical component included in the VIPower? series.It is set to 700mA in this case.A container with a capacity of Peripheral Drivers contains this self-contained lighting driver.The lighting driver is configured to have a maximum supply voltage of 36V (Vsup).This part has a power supply of 8/36V volts.It is recommended that the supply voltage be set at 41V in order to achieve maximum efficiency.
VN800PT13TR Features
Supplied from 24V
Resistance of 135mOhm
VN800PT13TR Applications
There are a lot of STMicroelectronics VN800PT13TR Power Switches ICs applications.
- Various applications equipped with buttons
- Gaming
- Hot Swap
- PC Card Hot Swap
- PDAs
- Hard Disk Drives
- USB Protection
- Hot Swap
- Mobile Communication Devices
- Portable Video Game Players
