VN800PTTR-E
| Parameters | |
|---|---|
| Terminal Finish | Tin (Sn) |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 41.7W |
| Terminal Position | SINGLE |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 13V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | VN800 |
| Pin Count | 4 |
| JESD-30 Code | R-PSSO-G4 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 2A |
| Supply Voltage-Max (Vsup) | 36V |
| Power Supplies | 8/36V |
| Interface | On/Off |
| Nominal Supply Current | 1.5mA |
| Output Configuration | High Side |
| Power Dissipation | 41.7W |
| Output Current | 700mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Output Current per Channel | 700mA |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5.5V~36V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Rds On (Typ) | 135m Ω (Max) |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Height Seated (Max) | 2.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-252-5, DPak (4 Leads + Tab), TO-252AD |
| Number of Pins | 5 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | VIPower™ |
| JESD-609 Code | e3 |
| Feature | Auto Restart, Status Flag |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 4 |
| ECCN Code | EAR99 |
| Resistance | 135mOhm |
VN800PTTR-E Overview
The package is in the form of a Tape & Reel (TR).It is included with the TO-252-5, DPak (4 Leads + Tab), TO-252AD package as well.The lighting driver has the mounting type Surface Mount.There is a General Purpose switch type associated with it.It is recommended to set the temperature to -40°C~150°C TJ in order to ensure reliable operation.The LED driver has a total of 1 outputs.The LED driving board operates at Not Required volts.A maximum output voltage of N-Channel volts can be achieved by this LED driver.Auto Restart, Status Flag features are available on the lighting driver.It is a member of the VN800 family.In total, there are 4 terminations.For operation, we use the 5 pins.There are 1 functions of the LED driver.Maximum output current falls to 2A when operation criteria are met.As long as the supply voltage is 13V, high efficiency can be achieved.In this case, it is mounted in the way of Surface Mount.In total, it has 4 pins.135mOhm is the resistance of the lighting driver.This electrical component is included in the VIPower? series.In this case, the output current is set to 700mA.The LED driver is packaged in an econtainer with a capacity of Peripheral Drivers.In this case, Vsup (maximum supply voltage) is set to 36V.The power supply of the part is 8/36V.
VN800PTTR-E Features
Supplied from 13V
Resistance of 135mOhm
VN800PTTR-E Applications
There are a lot of STMicroelectronics VN800PTTR-E Power Switches ICs applications.
- Hot Swap
- Gaming
- Storage (HDDs, SSDs)
- PC Cards
- PC Card Hot Swap
- Set-Top Boxes
- Wireless Headsets
- Hot Swap
- Portable GPS
- Solid-State Drives
