VN800S-E
| Parameters | |
|---|---|
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 4.2W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 13V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | VN800 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Max Output Current | 700mA |
| Supply Voltage-Max (Vsup) | 36V |
| Supply Voltage-Min (Vsup) | 5.5V |
| Interface | On/Off |
| Nominal Supply Current | 1.5mA |
| Output Configuration | High Side |
| Power Dissipation | 4.2W |
| Output Current | 700mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5.5V~36V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Rds On (Typ) | 135m Ω (Max) |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Height | 1.25mm |
| Length | 5mm |
| Width | 4mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Series | VIPower™ |
| JESD-609 Code | e4 |
| Feature | Auto Restart, Status Flag |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
VN800S-E Overview
It is package in Tube case.In the 8-SOIC (0.154, 3.90mm Width) package, it is included.The LED driver is mounted as Surface Mount.General Purpose is the switch type that it owns.To ensure reliable operation, the temperature should be set to -40°C~150°C TJ.The lighting driver is equipped with 1 outputs that can be used.It uses a supply voltage of Not Required to operate.A maximum output voltage of N-Channel volts can be achieved by this LED driver.Features of the lighting driver are Auto Restart, Status Flag.I believe it belongs to the VN800 family.It consists of 8 terminations in total.In order to operate, 8 pins are used.The LED driver has 1 functions.The maximum output current must drop to 700mA to meet the operation criteria.As long as the supply voltage is 13V, high efficiency can be achieved.The LED driving board is mounted in the way of Surface Mount.The LED driver has a total of 8 pins.The VIPower? series includes this electrical component.The output current is set to 700mA in this case.A self-contained econtainer holding Peripheral Drivers capacity contains this lighting driver.The maximum supply voltage is set to 36V.A normal operation requires that the supply voltage (Vsup) remain above 5.5V.
VN800S-E Features
Supplied from 13V
VN800S-E Applications
There are a lot of STMicroelectronics VN800S-E Power Switches ICs applications.
- Portable Music Players
- PC Card Hot Swap
- Set-top-box
- Hot-Swap Systems
- Wireless/Networking Cards
- USB Protection
- Notebook PC
- Hot Swap
- Hot Swaps
- Telecom and Network Systems
