VN800STR-E
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | VIPower™ |
| JESD-609 Code | e4 |
| Feature | Auto Restart, Status Flag |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 4.2W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 13V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | VN800 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Max Output Current | 700mA |
| Supply Voltage-Max (Vsup) | 36V |
| Supply Voltage-Min (Vsup) | 5.5V |
| Interface | On/Off |
| Nominal Supply Current | 1.5mA |
| Output Configuration | High Side |
| Power Dissipation | 4.2W |
| Output Current | 700mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5.5V~36V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Rds On (Typ) | 135m Ω (Max) |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Length | 4.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
VN800STR-E Overview
It's?packaged?in?the way?of?a?Tape & Reel (TR).The 8-SOIC (0.154, 3.90mm Width) package includes it.In this case, the LED driving board is mounted as Surface Mount.General Purpose is the type of switch owned by it.It is recommended to set the temperature to -40°C~150°C TJ in order to ensure reliable operation.The LED driver is equipped with 1 outputs.With a supply voltage of Not Required, the LED driving board operates.The maximum output voltage of this LED driver is N-Channel volts.In terms of features, the LED driving board has Auto Restart, Status Flag.This object belongs to the VN800 family.The termination count is 8.The operation is carried out using the 8 pins.It is important to note that the LED driving board has 1 functions.Maximum output current falls to 700mA when operation criteria are met.A supply voltage of 13V leads to high efficiency.The lighting driver is mounted in the direction of Surface Mount.This LED driver is equipped with a total of 8 pins.This electrical component is included in the VIPower? series.This case has the output current set to 700mA.It is self-contained in an econtainer with a capacity of Peripheral Drivers.The maximum supply voltage is set to 36V.In order to operate normally, the supply voltage (Vsup) must remain above 5.5V.
VN800STR-E Features
Supplied from 13V
VN800STR-E Applications
There are a lot of STMicroelectronics VN800STR-E Power Switches ICs applications.
- USB Power Distribution
- Wireless Modem Data Cards
- Storage (HDDs, SSDs)
- Hot-Swap Systems
- Portable/Handheld Devices
- Portable Music Players
- Low Voltage I/O System Power
- USB Ports/Hubs
- Various applications equipped with buttons
- PC Card Hot Swap
