VN808-E
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 8 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 36-BSSOP (0.433, 11.00mm Width) Exposed Pad |
| Number of Pins | 36 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Series | VIPower™ |
| JESD-609 Code | e3 |
| Feature | Auto Restart, Status Flag |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 36 |
| ECCN Code | EAR99 |
| Resistance | 150mOhm |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 96W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 8 |
| Supply Voltage | 24V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | VN808 |
| Pin Count | 36 |
| Output Type | N-Channel |
| Max Output Current | 700mA |
| Supply Voltage-Max (Vsup) | 45V |
| Power Supplies | 10.5/32V |
| Supply Voltage-Min (Vsup) | 10.5V |
| Interface | On/Off |
| Nominal Supply Current | 12mA |
| Output Configuration | High Side |
| Power Dissipation | 96W |
| Output Current | 700mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 50 μs |
| Switch Type | General Purpose |
| Output Current per Channel | 700mA |
| Turn-Off Delay Time | 100 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 10.5V~45V |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Number of Drivers | 8 |
| Rds On (Typ) | 150m Ω |
| Drain to Source Resistance | 280mOhm |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Height | 3.3mm |
| Length | 16mm |
| Width | 14.5mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
VN808-E Overview
Tube is how it's packaged.In the 36-BSSOP (0.433, 11.00mm Width) Exposed Pad package, it is included.The mounting type of the LED driver is Surface Mount.It owns General Purpose switch type.It is recommended to set the temperature to -40°C~125°C TJ in order to ensure reliable operation.In order to operate, it requires a voltage supply of Not Required.A maximum output voltage of N-Channel volts can be achieved by this LED driver.This LED driving board is equipped with Auto Restart, Status Flag features in order for it to be useful.It is part of the VN808 family of LED drivers.A total of 36 terminations can be found in it.The 36 pins are used to operate the LED driver.It is important to note that the LED driving board has 8 functions.To comply with the operation criteria, the maximum output current is reduced to 700mA.A supply voltage of 24V leads to high efficiency.It is positioned in the direction of Surface Mount.As a result, it has a total of 36 pins.It has a resistance of 150mOhm.This electrical component can be found in the VIPower? series.The output current is set to 700mA in this case.A self-contained container with a capacity of Peripheral Drivers contains this lighting driver.A maximum supply voltage of 45V is set in Vsup.Normal operation requires a voltage above 10.5V for the supply voltage.A 10.5/32V power supply is used by the part.It has 8 drivers.
VN808-E Features
Supplied from 24V
Resistance of 150mOhm
VN808-E Applications
There are a lot of STMicroelectronics VN808-E Power Switches ICs applications.
- USB Power Distribution
- PDAs
- Smart Phones, Feature Phones
- Wireless Modem Data Cards
- Hot Swap
- Smartphone and PDA
- HDD, SSD
- Portable GPS Device
- Portable/Handheld Devices
- Hot Swaps
