VN808CM-32-E
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 8 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | PowerSO-36 Exposed Bottom Pad |
| Number of Pins | 36 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Series | VIPower™ |
| Feature | Auto Restart, Status Flag |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 36 |
| ECCN Code | EAR99 |
| Resistance | 160mOhm |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 96W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 8 |
| Supply Voltage | 24V |
| Terminal Pitch | 0.65mm |
| Base Part Number | VN808 |
| Pin Count | 36 |
| Number of Outputs | 8 |
| Output Type | N-Channel |
| Max Output Current | 1A |
| Operating Supply Voltage | 24V |
| Supply Voltage-Max (Vsup) | 45V |
| Power Supplies | 10.5/32V |
| Interface | On/Off |
| Nominal Supply Current | 12mA |
| Output Configuration | High Side |
| Power Dissipation | 96W |
| Output Current | 1A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 12mA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 100 μs |
| Switch Type | General Purpose |
| Output Current per Channel | 1A |
| Turn-Off Delay Time | 150 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 10.5V~45V |
| Driver Number of Bits | 8 |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Rds On (Typ) | 160m Ω (Max) |
| Built-in Protections | THERMAL; UNDER VOLTAGE |
| Height | 3.3mm |
| Length | 16mm |
| Width | 11.1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
VN808CM-32-E Overview
As a result, it is packaged in the form of a Tube.It's included in the PowerSO-36 Exposed Bottom Pad package.Surface Mount is the mounting type of the LED driver.General Purpose is the switch type that it owns.To ensure reliable operation, set the temperature to -40°C~125°C TJ.In this LED driver, there are no outputs available.In order to operate, it requires a voltage supply of Not Required.There is a maximum output voltage of N-Channel volts.This LED driving board is equipped with Auto Restart, Status Flag features in order for it to be useful.The VN808 family consists of this type.It has a total of 36 terminations.The 36 pins are used for the operation of the system.As far as the lighting driver is concerned, there are 8 functions.In order to meet the operation criteria, the maximum output current drops to 1A.High efficiency is possible when the supply voltage is set to 24V.Surface Mount is mounted in the way.This LED driver is equipped with a total of 36 pins.Currently, the LED driving board has a resistance of 160mOhm ohms.This electrical component can be found in the VIPower? series.In this case, the output current is set to 1A.It is self-contained in an econtainer with a capacity of Peripheral Drivers.This LED driver is configured to have a maximum supply voltage of 45V (Vsup).A 10.5/32V power supply is used by the part.In order to maximize efficiency, the supply voltage should be set at 24V.For its operation, a current of 12mA is required.
VN808CM-32-E Features
Supplied from 24V
Resistance of 160mOhm
VN808CM-32-E Applications
There are a lot of STMicroelectronics VN808CM-32-E Power Switches ICs applications.
- USB Power Distribution
- Notebook PC
- Wireless Headsets
- Notebook and Tablet Computers
- Hot Swaps
- HDD and SSD
- Solid State Drivers
- Storage (HDDs, SSDs)
- Portable GPS Device
- Handheld Devices
