Parameters |
Fault Protection |
Current Limiting (Fixed), Over Temperature |
Turn On Time |
100 µs |
Rds On (Typ) |
160m Ω (Max) |
Drain to Source Resistance |
280mOhm |
Turn Off Time |
150 µs |
Built-in Protections |
TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE |
Output Current Flow Direction |
SOURCE |
Height Seated (Max) |
3.6mm |
Length |
15.9mm |
Width |
11mm |
Radiation Hardening |
No |
RoHS Status |
Non-RoHS Compliant |
Lead Free |
Contains Lead |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
36-BSSOP (0.433, 11.00mm Width) Exposed Pad |
Number of Pins |
36 |
Operating Temperature |
-40°C~125°C TJ |
Packaging |
Tube |
Series |
VIPower™ |
JESD-609 Code |
e3 |
Feature |
Auto Restart, Status Flag |
Pbfree Code |
yes |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
Number of Terminations |
36 |
ECCN Code |
EAR99 |
Terminal Finish |
Matte Tin (Sn) |
Subcategory |
Peripheral Drivers |
Max Power Dissipation |
96W |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
245 |
Number of Functions |
8 |
Supply Voltage |
24V |
Terminal Pitch |
0.65mm |
Time@Peak Reflow Temperature-Max (s) |
40 |
Base Part Number |
VN808 |
Pin Count |
36 |
Number of Outputs |
8 |
Output Type |
N-Channel |
Max Output Current |
700mA |
Supply Voltage-Max (Vsup) |
45V |
Power Supplies |
10.5/32V |
Supply Voltage-Min (Vsup) |
10.5V |
Interface |
On/Off |
Nominal Supply Current |
4mA |
Output Configuration |
High Side |
Voltage - Supply (Vcc/Vdd) |
Not Required |
Input Type |
Non-Inverting |
Switch Type |
General Purpose |
Ratio - Input:Output |
1:1 |
Voltage - Load |
10.5V~45V |
Driver Number of Bits |
8 |
VN808CM Overview
The package is in the form of a Tube.This package is included in 36-BSSOP (0.433, 11.00mm Width) Exposed Pad.The LED driver is mounted as Surface Mount.This switch is of type General Purpose.In order to guarantee reliable performance, the temperature should be set to -40°C~125°C TJ.There are 8 outputs available on this lighting driver.The LED driving board is powered by a voltage of Not Required.The maximum output voltage of this LED driver is N-Channel volts.It has a total of Auto Restart, Status Flag features.The VN808 family consists of this type.It contains 36 terminations.The 36 pins are used to operate the LED driver.As far as the lighting driver is concerned, there are 8 functions.The maximum output current must drop to 700mA to meet the operation criteria.With a supply voltage of 24V, high efficiency is possible.It is mounted in the way of Surface Mount.36 pins are connected to it in total.It is part of the VIPower? series.A self-contained container with a capacity of Peripheral Drivers contains this lighting driver.A maximum supply voltage of 45V is set in Vsup.A normal operation requires that the supply voltage (Vsup) remain above 10.5V.This part's power supply is 10.5/32V.
VN808CM Features
Supplied from 24V
VN808CM Applications
There are a lot of STMicroelectronics VN808CM Power Switches ICs applications.
- Wireless Headsets
- Mobile Communication Devices
- Hot Swaps
- Portable/Handheld Devices
- Storage Drives
- Wearable Devices
- Hard Disk Drives
- Portable Music Players
- Notebook and Tablet Computers
- Handheld Devices