VN808CM-E
| Parameters | |
|---|---|
| Number of Terminations | 36 |
| ECCN Code | EAR99 |
| Resistance | 160mOhm |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 96W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 8 |
| Supply Voltage | 24V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | VN808 |
| Pin Count | 36 |
| Output Type | N-Channel |
| Max Output Current | 1.7A |
| Power Supplies | 10.5/32V |
| Supply Voltage-Min (Vsup) | 10.5V |
| Interface | On/Off |
| Nominal Supply Current | 12mA |
| Output Configuration | High Side |
| Power Dissipation | 96W |
| Output Current | 700mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | -3V |
| Number of Inputs | 8 |
| Max Input Voltage | 45V |
| Output Current per Channel | 700mA |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 10.5V~45V |
| Driver Number of Bits | 8 |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Turn On Time | 100 µs |
| Rds On (Typ) | 160m Ω (Max) |
| Turn Off Time | 150 µs |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Height | 3.3mm |
| Length | 16mm |
| Width | 11.1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 8 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 36-BSSOP (0.433, 11.00mm Width) Exposed Pad |
| Number of Pins | 36 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Series | VIPower™ |
| JESD-609 Code | e3 |
| Feature | Auto Restart, Status Flag |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
VN808CM-E Overview
Tube is the way it's packaged.There is a 36-BSSOP (0.433, 11.00mm Width) Exposed Pad package that includes it.In this case, the LED driving board is mounted as Surface Mount.It owns the General Purpose switch type.It is recommended to set the temperature to -40°C~125°C TJ in order to ensure reliable operation.The LED driving board is powered by a voltage of Not Required.There is a maximum output voltage of N-Channel volts.As far as features are concerned, the LED driving board has Auto Restart, Status Flag.I believe it belongs to the VN808 family.In total, there are 36 terminations.During operation, the 36 pins are used.As far as the lighting driver is concerned, there are 8 functions.The maximum output current drops to 1.7A in order to meet the operation criteria.Using a voltage of 24V allows for high efficiency.The lighting driver is mounted in the way of Surface Mount.It is equipped with a total of 36 pins.160mOhm is the resistance of the lighting driver.These electrical components are part of the VIPower? series.This results in a 700mA output current.A self-contained LED driver with a capacity of Peripheral Drivers is contained in an econtainer.For normal operation, the supply voltage (Vsup) must be kept above 10.5V.In this part, the power supply is set to 10.5/32V.This LED driver can handle voltages up to 45V volts.There is a minimum input voltage of -3V volts.Currently, there are 8 inputs available.
VN808CM-E Features
Supplied from 24V
Resistance of 160mOhm
VN808CM-E Applications
There are a lot of STMicroelectronics VN808CM-E Power Switches ICs applications.
- USB Protection
- Wireless/Networking Cards
- Hot Swap
- Telecom and Network Systems
- Hard Disk Drives
- Gaming
- Smart Phones, Feature Phones
- Wireless Modem Data Cards
- Set-Top Boxes
- Notebook and Tablet Computers
