VN808CMTR-32-E
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 36-BSSOP (0.433, 11.00mm Width) Exposed Pad |
| Number of Pins | 36 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | VIPower™ |
| Feature | Auto Restart, Status Flag |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 36 |
| ECCN Code | EAR99 |
| Resistance | 160mOhm |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 96W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 8 |
| Supply Voltage | 24V |
| Terminal Pitch | 0.65mm |
| Base Part Number | VN808 |
| Pin Count | 36 |
| Number of Outputs | 8 |
| Output Type | N-Channel |
| Max Output Current | 1A |
| Operating Supply Voltage | 24V |
| Power Supplies | 10.5/32V |
| Interface | On/Off |
| Output Configuration | High Side |
| Power Dissipation | 96W |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 12mA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 100 μs |
| Switch Type | General Purpose |
| Output Current per Channel | 1A |
| Nominal Input Voltage | 45V |
| Turn-Off Delay Time | 150 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 10.5V~45V |
| Driver Number of Bits | 8 |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Rds On (Typ) | 160m Ω (Max) |
| Built-in Protections | THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SOURCE |
| Height Seated (Max) | 3.6mm |
| Length | 15.9mm |
| Width | 11mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
VN808CMTR-32-E Overview
A Tape & Reel (TR) is used to package it.There is a 36-BSSOP (0.433, 11.00mm Width) Exposed Pad package that includes it.The lighting driver is mounted in the Surface Mount position.General Purpose is the switch type it owns.The temperature should be set to -40°C~125°C TJ to ensure reliable functioning.The LED driver is equipped with 8 outputs.It uses a supply voltage of Not Required to operate.Voltage output is N-Channel volts at maximum.Features of the lighting driver are Auto Restart, Status Flag.This object belongs to the VN808 family.In total, there are 36 terminations.During operation, the 36 pins are used.Currently, the lighting driver has a total of 8 functions.It is necessary to reduce the maximum output current to 1A to meet the operation criteria.Using a voltage of 24V allows for high efficiency.As a result, it is mounted in the manner of Surface Mount.In total, it has 36 pins.In this case, there is 160mOhm resistance in the LED driving board.This electrical component is part of the VIPower? series.A self-contained LED driver with a capacity of Peripheral Drivers is contained in an econtainer.There is a voltage supply of 10.5/32V volts on this part.In order to optimize the efficiency of the supply voltage, it should be set to 24V.The maximum current required for its operation is 12mA.
VN808CMTR-32-E Features
Supplied from 24V
Resistance of 160mOhm
VN808CMTR-32-E Applications
There are a lot of STMicroelectronics VN808CMTR-32-E Power Switches ICs applications.
- Low Voltage I/O System Power
- Mobile Communication Devices
- USB Power Distribution
- Portable Video Game Players
- Portable Music Players
- Storage Drives
- Storage (HDDs, SSDs)
- PDAs
- Solid-State Drives
- PC Card Hot Swap
