VN808CMTR-E
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 36-BSSOP (0.433, 11.00mm Width) Exposed Pad |
| Number of Pins | 36 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | VIPower™ |
| JESD-609 Code | e3 |
| Feature | Auto Restart, Status Flag |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 36 |
| ECCN Code | EAR99 |
| Resistance | 160mOhm |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 96W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 8 |
| Supply Voltage | 24V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | VN808 |
| Pin Count | 36 |
| Number of Outputs | 8 |
| Output Type | N-Channel |
| Max Output Current | 1.7A |
| Operating Supply Voltage | 45V |
| Power Supplies | 10.5/32V |
| Interface | On/Off |
| Nominal Supply Current | 12mA |
| Output Configuration | High Side |
| Power Dissipation | 96W |
| Output Current | 700mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 150μA |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 10.5V |
| Max Input Voltage | 45V |
| Output Current per Channel | 700mA |
| Nominal Input Voltage | 45V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 10.5V~45V |
| Driver Number of Bits | 8 |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Turn On Time | 100 µs |
| Rds On (Typ) | 160m Ω (Max) |
| Turn Off Time | 150 µs |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Height Seated (Max) | 3.6mm |
| Length | 15.9mm |
| Width | 11mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
VN808CMTR-E Overview
Tape & Reel (TR) is how it's packaged.It's included in the 36-BSSOP (0.433, 11.00mm Width) Exposed Pad package.This lighting drivere has a mounting type of Surface Mount.A General Purpose switch type is owned by it.It is recommended to set the temperature to -40°C~125°C TJ in order to ensure reliable operation.As a default, the output is set to 8.A supply voltage of Not Required is required for it to operate.A maximum output voltage of N-Channel volts has been specified.The lighting driver has Auto Restart, Status Flag features.The VN808 family contains this object.It consists of 36 terminations in total.For operation, we use the 36 pins.It contains 8 functions.The maximum output current is reduced to 1.7A to meet the operation criteria.With a supply voltage of 24V, high efficiency is possible.It is mounted in the way of Surface Mount.There are 36 pins in total on this board.In this LED driving board, there is 160mOhm resistance.This electrical component is included in the VIPower? series.This case has the output current set to 700mA.A self-contained econtainer holding Peripheral Drivers capacity contains this lighting driver.There is a voltage supply of 10.5/32V volts on this part.It is recommended that the supply voltage be set at 45V in order to achieve maximum efficiency.As far as input voltage goes, its maximum is 45V volts.Input voltage must be at least 10.5V volts.There is a maximum current requirement of 150μA for its operation.
VN808CMTR-E Features
Supplied from 24V
Resistance of 160mOhm
VN808CMTR-E Applications
There are a lot of STMicroelectronics VN808CMTR-E Power Switches ICs applications.
- PC Cards
- Telecom and Network Systems
- Notebook and Tablet Computers
- Hot Swaps
- PC Card Hot Swap
- Notebook PC
- Wireless Modem Data Cards
- Various applications equipped with buttons
- Smartphone and PDA
- Wireless/Networking Cards
